Consumables for tools - Page 37

Milwaukee 4932373358 Metal Drill Bit Set, HSS-G Cobalt (5 pcs.) The Milwaukee 4932373358 drill bits are made of high-speed, heat-resistant steel. Cobalt content: 5%, in accordance with DIN 338. They withstand the high temperatures generated during drilling. They feature a polished surface and a 135° cutting point for better centering and to prevent slipping on the surface. Flute: N-type with a general angle. Suitable for drilling in steel and metals with a tensile strength above 1000 N/mm2, as well as heat-resistant and acid-resistant steels. Color: bronze. Technical specifications:Brand: Milwaukee;Diameter: 12 mm;Working length: 101 mm;Total length: 151 mm;Packaging (pcs): 5 pcs;Material: HSS - G COBALT;Application: for metal;Standard: D338;Characteristics: ground;Drill shank type: cylindrical. ..

Bahco Sandflex Bi-Metal Holesaw 25 mm, 3830-25 Bahco 3830-25 is a bi-metal holesaw from the Sandflex range, 25 mm (1 inch) in diameter with a maximum cutting depth of 38 mm. The diameter is printed on the body, so a saw is identified at a glance when several sizes share the same case. The range covers 14 to 152 mm and is used wherever a clean round hole is needed in thin material - back boxes, pipe runs, cable glands, locks and door hardware. Bi-metal construction The cutting edge is high speed steel with 8% cobalt, electron-beam welded to a tough alloy backing. The cobalt keeps the edge hard at the temperature that builds up when cutting metal, while the tough body absorbs the shock and vibration instead of letting the teeth snap. That combination is exactly why a bi-metal saw cuts steel where a single-steel saw dulls within minutes. Variable tooth pitch The teeth are cut at a varipitch of 4 to 6 teeth per inch. Spacing the teeth unevenly breaks up the resonance that makes an evenly pitched saw skip across the surface as the cut starts. The saw bites more calmly, less vibration reaches your hands, and the finished hole has a cleaner edge. Materials and applications The saw cuts ferrous and non-ferrous metals including stainless steel, as well as wood, chipboard, plasterboard and plastics. It runs in both portable and bench drills. The two slots in the body are there to knock the core out with a pin or a screwdriver, so you never have to strike the teeth. Arbor The arbor - the holder carrying the pilot drill - is not included and is ordered separately. For the 14-30 mm band that this saw belongs to, Bahco offers arbor 930 with an 8.5 mm (3/8 inch) shank and arbor 1130 with an 11.1 mm (7/16 inch) shank. One arbor serves every saw in the band. Technical specifications ManufacturerBahco RangeSandflex Bi-Metal, variable pitch Model / article3830-25 TypeBi-metal holesaw Diameter25 mm (1 inch) Max. cutting depth38 mm Teeth4-6 teeth per inch (varipitch) Cutting edge materialHigh speed steel with 8% cobalt BodyHeat-treated alloy steel, electron-beam welded seam Suitable materialsSteel, stainless steel, non-ferrous metals, wood, chipboard, plasterboard, plastics MountingVia arbor - not included Matching arbors930 (8.5 mm shank) and 1130 (11.1 mm shank) for the 14-30 mm band EAN (VIP variant)7311518041694 Pack quantity1 piece Questions and Answers What hole does this saw cut? A 25 mm hole in material up to 38 mm thick, which is the maximum cutting depth of the Sandflex range. The finished hole comes out at nominal size plus up to 1.5 mm, the normal tolerance for a bi-metal holesaw. Is the arbor included? No. The arbor carrying the pilot drill is ordered separately. For a 25 mm saw the right ones are Bahco's arbors for the 14-30 mm band: 930 with an 8.5 mm shank and 1130 with an 11.1 mm shank. A single arbor covers every saw in that band. Will it cut stainless steel? Yes. The cutting edge is high speed steel with 8% cobalt, which is precisely the addition intended for stainless. Run stainless at low speed with steady pressure and always use cutting fluid, otherwise the material work-hardens and the teeth dull quickly. What speed should I run it at? The harder the material and the larger the diameter, the lower the speed. For 25 mm in steel stay at the low end of the drill's range, keep steady pressure and never let the saw spin without cutting. In wood and plastic much higher speeds are fine. How do I get the cut-out slug out? Through the two slots in the body. Push a pin or a thin screwdriver through and knock the slug out. Never hammer on the teeth - that is the single most common cause of a broken tooth on a bi-metal saw. How is variable pitch different from a standard pitch? With an even pitch every tooth enters the material in the same rhythm and a resonance builds up that makes the saw skip. A varipitch of 4 to 6 teeth per inch breaks that rhythm: the saw bites more calmly, vibrates less and leaves a cleaner hole edge. What is the difference between 3830-25-VIP and 3830-25-C? The saw itself is identical - only the packaging differs. VIP comes in a cardboard box for trade use, while C is a self-service blister pack with a leaflet that doubles as a tooth guard. ..

Circular saw blades are specially designed for professionals who need to drill into extremely hard materials such as porcelain, tiles, floor tiles, cast iron, or fiberglass, which are very difficult to drill with conventional circular saws. These circular saw blades deliver excellent performance and superior support for the hardest materials. Water consumption: Unlike conventional diamond drill bits, which require a continuous water supply, these circular saw blades require only a limited amount of water. At the start of cutting each hole or drilling, simply dip the saw or drill bit in water. After that, this should be repeated every 5 seconds. Clean holes: Clean drilling and precise hole cutting without peripheral material chipping. Maintenance: To ensure long-term use, high-quality diamond is used for fast cutting and perfect preservation of the blade with exceptional durability. Maintenance: The sturdy aluminum housing does not bend and is durable. Easy removal of cuttings: The design ensures minimal material loss, even with tight cuts. Versatile use: Can be used with angle grinders using the appropriate adapter or with drills...

Milwaukee 18G Brad Nails, 32 mm, Galvanised, 5000 Pieces, 4932459128 Milwaukee 4932459128 are brad nails in 18 gauge, 32 mm long, with a galvanised finish and resin collation. The pack contains 5,000 pieces. What an 18G nail is 18G is the thickness: 1.0 x 1.25 mm. This is the fine gauge whose head is barely visible - it leaves a hole that a dab of filler closes and paint hides. That is exactly why 18G is the standard for second fix work: architrave, cladding, frames, cabinet backs, decorative beading. The trade-off is clear: 18G holds less than the heavier 16G and 15G. A fine nail pins the part while the glue sets, or carries a light component - it does not take structural load. A load-bearing joint needs a heavier gauge or a screw. The 32 mm length 32 mm is the middle of the 18G range. The rule with nails is that about two thirds of the length should go into the substrate: at 32 mm through a 10-12 mm bead, 20 mm remains in the base material - enough for a solid hold in timber and MDF. Galvanised finish Galvanising is a zinc coating against corrosion. Its practical value is greatest in oak and other tannin-rich timbers, where a bare nail reacts with the wood and leaves black staining around the head - a defect that only appears weeks later, by which time it cannot be fixed. The coating also helps in damp rooms, but it does not make the nail stainless: bathrooms, decking and exterior work call for stainless nails. Resin collation The nails are collated into a strip with resin. On firing, friction melts the resin and it acts as adhesive in the hole - holding power rises noticeably against an uncollated nail. This is the standard on quality nailer consumables. Compatibility These are 18G straight-magazine nails - the standard adopted by every brad nailer manufacturer. They work in cordless and pneumatic 18G nailers, including Milwaukee's own M18 machines. Before buying, check the length range of your particular nailer - most 18G machines take 15 mm up to 50-64 mm. Technical specifications ManufacturerMilwaukee Article number4932459128 TypeBrad nails Gauge18G Dimensions1.0 x 1.25 mm Length32 mm FinishGalvanised CollationResin Pack quantity5,000 pieces For machines18G nailers, cordless and pneumatic Questions and Answers How long are the nails? 32 mm. Article 4932459128 is the 32 mm version; the 40 mm one is 4932459129. What does 18G mean? The thickness - 1.0 x 1.25 mm. It is the fine gauge whose head is barely visible and whose hole disappears under filler and paint. The standard for second fix work. Do they hold enough for a structural joint? No. 18G pins the part while the glue sets, or carries a light component. A load-bearing joint needs a heavier gauge (16G, 15G) or a screw. Why galvanised? The zinc coating resists corrosion. It matters most in oak and tannin-rich timbers, where a bare nail reacts with the wood and leaves black staining that only shows up weeks later. Are they suitable for bathrooms or decking? Galvanising helps against damp but does not make the nail stainless. Bathrooms, decking and exterior work call for stainless nails. What does resin collation do? On firing, friction melts the resin and it acts as adhesive in the hole. Holding power rises noticeably against an uncollated nail. Will they fit my nailer? They work in any 18G straight-magazine nailer, cordless or pneumatic. Just check that 32 mm falls inside your machine's length range; most 18G nailers take 15 mm upward. ..

Milwaukee Adapter 4932480300Description: The Milwaukee 4932480300 adapter is made of high-quality alloy steel, which ensures exceptional strength and durability. Ink markings for quick tool identification. With a total length of 37 mm and a compact design featuring a double-hole and a groove for a rubber retaining ring. Technical Specifications:Brand: MilwaukeeModel: 4932480300Adapter: from 3/8" to 1/2"Size: 37 mm..

DIAMOND MAXTM diamond drill bits are specially designed for professionals who need to drill into extremely hard materials such as porcelain, ceramic tiles, stone, cast iron, or fiberglass, where it is increasingly difficult to work with conventional drill bits. These drill bits guarantee excellent performance and outstanding durability even with the most demanding materials. Dry drilling-no water cooling required M14 thread: For direct mounting on an angle grinder Clean holes: Drill clean, precise holes without scratching the surface. Durability: To ensure longevity, we use high-quality diamond segments for fast cutting and an excellent brazed bonding matrix to guarantee the best durability. Durability: An extremely hard alloy body that does not bend or deform easily. Applications: Ceramic tiles-all types of hard and soft: Porcelain / Gres / Quarry / Terrazzo / Marble / Artificial stone / Terracotta / Agglomerate / Glazed, cast iron, fiberglass / GPR, Perspex / (glass-filled plastic)..

Milwaukee 49224083 drill bit set with a bimetal construction for faster and more efficient cutting. They are made of Matrix II steel with high wear resistance, allowing for cutting of both harder materials (stainless steel) and softer ones (wood). The diagonal slots facilitate easier removal and ejection of debris. The back plates are made of solid steel, which prevents wear and the enlargement of the holes over time. The set includes: • 5 drill bits; • 1 1/2" adapter • 1 wrench • 1 carrying case Technical specifications: • Core bit size: W - 19, 22, 25, 29, 32 mm • Cutting depth: 41 mm • Dimensions: W 14 - 30 • Body thickness: 1.27 mm • Tooth angle: 10°..