Borkoroni - Page 4

Diamond-coated drill bits are specially designed for professionals who need to drill into extremely hard materials such as porcelain, stoneware, floor tiles, cast iron, or fiberglass, which are very difficult to drill with conventional drill bits. These circular saws deliver excellent performance and superior support for the hardest materials. Water consumption: Unlike conventional diamond drill bits, which require a continuous water supply, these circular saws require only a limited amount of water. At the start of cutting each hole or drilling, simply dip the saw or drill bit in water. After that, this should be repeated every 5 seconds. Clean holes: Clean drilling and precise hole cutting without peripheral material chipping. Durability: To ensure long-term use, high-quality diamond grit is used for fast cutting and perfect preservation of the blade with exceptional support. Durability: The sturdy aluminum housing does not bend and is durable. Easier removal of cut material: Recommended for use with safety guards to ensure greater material removal, suitable for tight cuts. Versatile use: Can be used with angle grinders using the appropriate adapter or with drills. How to use with angle grinders: 1. Screw the M14 threaded adapter onto the angle grinder and tighten the circular saw blade securely with a wrench. Then use the spindle lock on the angle grinder and place the adapter directly onto the spindle. Then tighten securely with a wrench. 2. If the tiles are not fixed to the wall or floor, make sure they are securely clamped in place. 3. Dip the cutting edge of the circular saw blade in water. 4. Turn on the angle grinder at full speed. To prevent the tile from slipping, slowly bring the grinder toward the tile at a 20-30° angle and with light pressure. When the circular saw begins to cut into the tile and form a groove, gradually lift the circular saw so that the blade is horizontal to the tile. 5. Dip the cutting edge of the circular saw into water every 5 seconds. 6. Apply light pressure and use circular motions to maximize tool life...

Diamond-coated drill bits are specially designed for professionals who need to drill into extremely hard materials such as porcelain, stoneware, floor tiles, cast iron, or fiberglass, which are very difficult to drill with conventional drill bits. These circular saws deliver excellent performance and superior support for the hardest materials. Water consumption: Unlike conventional diamond drill bits, which require a continuous water supply, these circular saws require only a limited amount of water. At the start of cutting each hole or drilling, simply dip the saw or drill bit in water. After that, this should be repeated every 5 seconds. Clean holes: Clean drilling and precise hole cutting without peripheral material chipping. Durability: To ensure long-term use, high-quality diamond tips are used for fast cutting and perfect preservation of the blade with exceptional support. Durability: The sturdy aluminum body does not bend and is durable. Easier removal of cut material: Recommended for use with safety guards to ensure greater material removal, suitable for tight cuts. Versatile use: Can be used with angle grinders using the appropriate adapter or with drills. How to use with angle grinders: 1. Screw the M14 threaded adapter onto the angle grinder and tighten the circular saw blade securely with a wrench. Then use the spindle lock on the angle grinder and place the adapter directly onto the spindle. Then tighten securely with a wrench. 2. If the tiles are not fixed to the wall or floor, make sure they are securely clamped in place. 3. Dip the cutting edge of the circular saw blade in water. 4. Turn on the angle grinder at full speed. To prevent the tile from slipping, slowly bring the grinder toward the tile at a 20-30° angle and with light pressure. When the circular saw begins to cut into the tile and form a groove, gradually raise the circular saw so that the blade is horizontal to the tile. 5. Dip the cutting edge of the circular saw into water every 5 seconds. 6. Apply light pressure and use circular motions to maximize tool life...

Diamond-coated core bits are specially designed for professionals who need to drill into extremely hard materials such as porcelain, stoneware, floor tiles, cast iron, or fiberglass, which are very difficult to drill with conventional core bits. These circular saws deliver excellent performance and superior support for the hardest materials. Water consumption: Unlike conventional diamond drill bits, which require a continuous water supply, these circular saws require only a limited amount of water. At the start of cutting each hole or drilling, simply dip the saw or drill bit in water. After that, this should be repeated every 5 seconds. Clean holes: Clean drilling and precise hole cutting without peripheral material chipping. Durability: To ensure long-term use, high-quality diamond grit is used for fast cutting and perfect preservation of the blade with exceptional support. Durability: The sturdy aluminum housing does not bend and is durable. Easier removal of cut material: Recommended for use with safety guards to ensure greater material removal, suitable for tight cuts. Versatile use: Can be used with angle grinders using the appropriate adapter or with drills. How to use with angle grinders: 1. Screw the M14 threaded adapter onto the angle grinder and tighten the circular saw blade securely with a wrench. Then use the spindle lock on the angle grinder and place the adapter directly onto the spindle. Then tighten securely with a wrench. 2. If the tiles are not fixed to the wall or floor, make sure they are securely clamped in place. 3. Dip the cutting edge of the circular saw blade in water. 4. Turn on the angle grinder at full speed. To prevent the tile from slipping, slowly bring the grinder toward the tile at a 20-30° angle and with light pressure. When the circular saw begins to cut into the tile and form a groove, gradually lift the saw so that the blade is horizontal to the tile. 5. Dip the cutting edge of the circular saw into water every 5 seconds. 6. Apply light pressure and use circular motions to maximize tool life...

Diamond-coated drill bits are specially designed for professionals who need to drill into extremely hard materials such as porcelain, stoneware, floor tiles, cast iron, or fiberglass, which are very difficult to drill with conventional drill bits. These circular saws deliver excellent performance and superior support for the hardest materials. Water consumption: Unlike conventional diamond drill bits, which require a continuous water supply, these circular saws require only a limited amount of water. At the start of cutting each hole or drilling, simply dip the saw or drill bit in water. After that, this should be repeated every 5 seconds. Clean holes: Clean drilling and precise hole cutting without peripheral material chipping. Durability: To ensure long-term use, high-quality diamond grit is used for fast cutting and perfect preservation of the blade with exceptional support. Durability: The sturdy aluminum housing does not bend and is durable. Easier removal of cut material: Recommended for use with safety guards to ensure greater material removal, suitable for tight cuts. Versatile use: Can be used with angle grinders using the appropriate adapter or with drills. How to use with angle grinders: 1. Screw the M14 threaded adapter onto the angle grinder and tighten the circular saw blade securely with a wrench. Then use the spindle lock on the angle grinder and place the adapter directly onto the spindle. Then tighten securely with a wrench. 2. If the tiles are not fixed to the wall or floor, make sure they are securely clamped in place. 3. Dip the cutting edge of the circular saw blade in water. 4. Turn on the angle grinder at full speed. To prevent the tile from slipping, slowly bring the grinder toward the tile at a 20-30° angle and with light pressure. When the circular saw begins to cut into the tile and form a groove, gradually raise the saw so that the blade is horizontal to the tile. 5. Dip the cutting edge of the circular saw into water every 5 seconds. 6. Apply light pressure and use circular motions to maximize tool life...

Milwaukee 4932478278 Diamond Core BitDescription: The Milwaukee 4932478278 diamond core bit for ceramics is specially designed for drilling materials such as porcelain, stone, marble, artificial stone, terracotta, and ceramics. With a diameter of 25 mm and a length of 68 mm , this drill bit features a special diamond coating along the entire edge, designed specifically for professionals working with extremely hard materials where standard tools cannot cope. This tool allows for dry drilling, as the core bits do not require additional cooling. It features an M14 thread and a working length of 35 mm , making it suitable for various tasks while ensuring comfort and efficiency when working with these types of materials. Technical specifications:Diameter: Ø 25 mmWorking length: 35 mmLength: 68 mmCore bit connection: metric threadType of material to be processed: porcelain tile, ceramicWeight: 0.1 kg..

Milwaukee Diamond MAX Diamond Core Bit for Ceramic, 10 x 68 mm, 4932471761 The Milwaukee 4932471761 Diamond MAX diamond core bit has a long service life thanks to its exceptionally sturdy body, which resists bending under load. This model operates exceptionally cleanly and delivers precise results. It is suitable for cutting holes in extremely hard materials such as porcelain, ceramic tiles, cast iron, or fiberglass. The special diamond coating along the entire edge is specifically designed for professionals who need to drill holes in extremely hard materials where drilling with conventional tools is impossible. Drilling is dry because the drill bits do not require additional cooling. The drill bit has an M14 thread, and the working length is 35 mm. Technical specifications:Brand: Milwaukee;Diameter: 10 mm;Working length: 35 mm;Overall length: 68 mm;Material: diamond powder;Application: for ceramics, porcelain tiles, porcelain, fiberglass;Usage: dry drilling with an M14 angle grinder;Quantity per package: 1 pc.Weight: 0.400 kg...

Milwaukee Diamond MAX Diamond Core Bit for Ceramic, 12 x 68 mm, 4932471762 The Milwaukee 4932471762 Diamond MAX diamond core bit has a long service life thanks to its exceptionally sturdy body, which resists bending under load. This model operates exceptionally cleanly and delivers precise results. It is suitable for cutting holes in extremely hard materials such as porcelain, ceramic tiles, cast iron, or fiberglass. The special diamond coating along the entire edge is specifically designed for professionals who need to drill holes in extremely hard materials where drilling with conventional tools is impossible. Drilling is dry because the drill bits do not require additional cooling. The drill bit has an M14 thread, and the working length is 35 mm. Technical specifications:Brand: Milwaukee;Diameter: 12 mm;Working length: 35 mm;Overall length: 68 mm;Material: diamond powder;Application: for ceramics, porcelain tiles, porcelain, fiberglass;Usage: dry drilling with an M14 angle grinder;Quantity per package: 1 pc.Weight: 0.400 kg...

Milwaukee Diamond MAX Diamond Core Bit for Ceramic, 14 x 68 mm, 4932471763 The Milwaukee 4932471763 Diamond MAX diamond core bit has a long service life thanks to its exceptionally sturdy body, which resists bending under load. This model operates exceptionally cleanly and delivers precise results. It is suitable for cutting holes in extremely hard materials such as porcelain, ceramic tiles, cast iron, or fiberglass. The special diamond coating along the entire edge is specifically designed for professionals who need to drill holes in extremely hard materials where drilling with conventional tools is impossible. Drilling is dry because the drill bits do not require additional cooling. The drill bit has an M14 thread, and the working length is 35 mm. Technical specifications:Brand: Milwaukee;Diameter: 14 mm;Working length: 35 mm;Overall length: 68 mm;Material: diamond powder;Application: for ceramics, porcelain tiles, porcelain, fiberglass;Application: dry drilling with an M14 angle grinder;Quantity per package: 1 pc.Weight: 0.400 kg...

Milwaukee Diamond MAX Diamond Core Bit for Ceramic, 20 x 75 mm, 4932479078 The Milwaukee 4932479078 Diamond MAX diamond core bit has a long service life thanks to its exceptionally sturdy body, which resists bending under load. This model operates exceptionally cleanly and delivers precise results. It is suitable for cutting holes in extremely hard materials such as porcelain, ceramic tiles, cast iron, or fiberglass. The special diamond coating along the entire edge is specifically designed for professionals who need to drill holes in extremely hard materials where drilling with conventional tools is impossible. Drilling is dry because the drill bits do not require additional cooling. The drill bit has an M14 thread, and the working length is 35 mm. Technical specifications:Brand: Milwaukee;Diameter: 20 mm;Working length: 35 mm;Overall length: 75 mm;Material: diamond powder;Application: for ceramics, porcelain tiles, porcelain, fiberglass;Usage: dry drilling with an M14 angle grinder;Quantity per package: 1 pc.Weight: 0.500 kg...

Milwaukee Diamond MAX Diamond Core Bit for Ceramic, 44 x 68 mm, 4932478282 The Milwaukee 4932478282 Diamond MAX diamond core bit has a long service life thanks to its exceptionally sturdy body, which resists bending under load. This model operates exceptionally cleanly and delivers precise results. It is suitable for cutting holes in extremely hard materials such as porcelain, ceramic tiles, cast iron, or fiberglass. The special diamond coating along the entire edge is specifically designed for professionals who need to drill holes in extremely hard materials where drilling with conventional tools is impossible. Drilling is dry because the drill bits do not require additional cooling. The drill bit has an M14 thread, and the working length is 35 mm. Technical specifications:Brand: Milwaukee;Diameter: 44 mm;Working length: 35 mm;Overall length: 68 mm;Material: diamond powder;Application: for ceramics, porcelain tiles, porcelain, fiberglass;Application: dry drilling with an M14 angle grinder;Quantity per package: 1 pc.Weight: 0.500 kg..

Milwaukee Diamond MAX Diamond Core Bit for Ceramic, 6x68mm, 4932471759 The Milwaukee 4932471759 Diamond MAX diamond core bit has a long service life thanks to its exceptionally sturdy body, which resists bending under load. This model operates exceptionally cleanly and delivers precise results. It is suitable for cutting holes in extremely hard materials such as porcelain, ceramic tiles, cast iron, or fiberglass. The special diamond coating along the entire edge is specifically designed for professionals who need to drill holes in extremely hard materials where drilling with conventional tools is impossible. Drilling is dry because the drill bits do not require additional cooling. The drill bit has an M14 thread, and the working length is 35 mm. Technical specifications:Brand: Milwaukee;Diameter: 6 mm;Working length: 35 mm;Overall length: 68 mm;Material: diamond powder;Application: for ceramics, porcelain tiles, porcelain, fiberglass;Usage: dry drilling with a drill or M14 screwdriver;Quantity per package: 1 pc.Weight: 0.100 kg...

DIAMOND MAXTM diamond drill bits are specially designed for professionals who need to drill into extremely hard materials such as porcelain, ceramic tiles, brittle tiles, cast iron, or fiberglass-materials that are difficult to work with using conventional drill bits. These drill bits guarantee excellent performance and outstanding durability even in the most demanding materials. Clean holes: drill clean, precise holes without scratching the surrounding surface. Dry drill bits-no water cooling required. M14 thread: For direct mounting on an angle grinder. Service life: Designed to ensure a long service life...

Milwaukee 49560704 Metal Core Drill BitDescription: The Milwaukee 49560704 metal core drill bit offers up to 10 times longer life and high resistance to heat and wear compared to bi-metal core drill bits. With an aggressive 3 TPI tooth geometry, it provides improved material removal and reduced cutting resistance. The PLUG JACKTM base geometry allows for deep access to remove thick plugs and effective performance on thin materials. It is ideal for metalworking, including stainless steel and high-alloy steels, as well as for cutting plastics, sandwich materials, fiberglass, plastic-coated wood panels, and wood with nails. Technical specifications:Diameter: 22 mm;Depth: 41 mm;Maximum cutting depth: 41 mm;Tooth geometry: TpiQuantity per package: 1 pc...

Milwaukee 49560707 Carbide-Tipped Core DrillDescription: The Milwaukee 49560707 metal drill bit offers up to 10 times longer life and high resistance to heat and wear compared to bimetal drill bits. With an aggressive 3 Tpi tooth geometry, it provides improved material removal and less cutting resistance. The PLUG JACKTM base geometry allows for deep access to remove thick plugs and effective performance on thin materials. It is ideal for metalworking, including stainless steel and high-alloy steels, as well as for cutting plastics, sandwich materials, fiberglass, plastic-coated wood panels, and wood with nails. Technical specifications:Diameter: 25 mm;Depth: 41 mm;Maximum cutting depth: 41 mm;Tooth geometry: TpiQuantity per package: 1 pc...

Milwaukee 49560710 Carbide-Tipped Core Drill BitDescription: The Milwaukee 49560710 metal core drill bit offers up to 10 times longer life and high resistance to heat and wear compared to bimetal core drill bits. With an aggressive 3 Tpi tooth geometry, it provides improved material removal and less cutting resistance. The PLUG JACKTM base geometry allows for deep access to remove thick plugs and effective performance on thin materials. It is ideal for metalworking, including stainless steel and high-alloy steels, as well as for cutting plastics, sandwich materials, fiberglass, plastic-coated wood panels, and wood with nails. Technical specifications:Diameter: 32 mm;Depth: 41 mm;Maximum cutting depth: 41 mm;Tooth geometry: TpiQuantity per package: 1 pc...