Borkoroni - Page 12

Diamond-coated core bits are specially designed for professionals who need to drill into extremely hard materials such as porcelain, stoneware, floor tiles, cast iron, or fiberglass, which are very difficult to drill with conventional core bits. These circular saws deliver excellent performance and superior support for the hardest materials. Water consumption: Unlike conventional diamond drill bits, which require a continuous water supply, these circular saws require only a limited amount of water. At the start of cutting each hole or drilling, simply dip the saw or drill bit in water. After that, this should be repeated every 5 seconds. Clean holes: Clean drilling and precise hole cutting without peripheral material chipping. Durability: To ensure long-term use, high-quality diamond grit is used for fast cutting and perfect preservation of the blade with exceptional support. Durability: The sturdy aluminum housing does not bend and is durable. Easier removal of cut material: Recommended for use with safety guards to ensure greater material removal, suitable for tight cuts. Versatile use: Can be used with angle grinders using the appropriate adapter or with drills. How to use with angle grinders: 1. Screw the M14 threaded adapter onto the angle grinder and tighten the circular saw blade securely with a wrench. Then use the spindle lock on the angle grinder and place the adapter directly onto the spindle. Then tighten securely with a wrench. 2. If the tiles are not fixed to the wall or floor, make sure they are securely clamped in place. 3. Dip the cutting edge of the circular saw blade in water. 4. Turn on the angle grinder at full speed. To prevent the tile from slipping, slowly bring the grinder toward the tile at a 20-30° angle and with light pressure. When the circular saw begins to cut into the tile and form a groove, gradually lift the saw so that the blade is horizontal to the tile. 5. Dip the cutting edge of the circular saw into water every 5 seconds. 6. Apply light pressure and use circular motions to maximize tool life...

Milwaukee Diamond MAX Diamond Core Bit for Ceramic, 68 x 68 mm, 4932478285 The Milwaukee 4932478285 Diamond MAX diamond core bit has a long service life thanks to its exceptionally sturdy body, which resists bending under load. This model operates exceptionally cleanly and delivers precise results. It is suitable for cutting holes in extremely hard materials such as porcelain, ceramic tiles, cast iron, or fiberglass. The special diamond coating along the entire edge is specifically designed for professionals who need to drill holes in extremely hard materials where drilling with conventional tools is impossible. Drilling is dry because the drill bits do not require additional cooling. The drill bit has an M14 thread, and the working length is 35 mm. Technical specifications:Brand: Milwaukee;Diameter: 68 mm;Working length: 35 mm;Overall length: 68 mm;Material: diamond powder;Application: for ceramic, porcelain tile, porcelain, fiberglass;Usage: dry drilling with an M14 angle grinder;Quantity per package: 1 pc.Weight: 0.500 kg...

Milwaukee 49560702 Metal Core Drill BitDescription: The Milwaukee 49560702 metal core drill bit offers up to 10 times longer life and high resistance to heat and wear compared to bi-metal core drill bits. With an aggressive 3 Tpi tooth geometry, it provides improved material removal and less cutting resistance. The PLUG JACKTM base geometry allows for deep access to remove thick plugs and effective performance on thin materials. It is ideal for metalworking, including stainless steel and high-alloy steels, as well as for cutting plastics, sandwich materials, fiberglass, plastic-coated wood panels, and wood with nails. Technical specifications:Diameter: 19 mm;Depth: 41 mm;Maximum cutting depth: 41 mm;Tooth geometry: TpiQuantity per package: 1 pc...

Wolfcraft 3498000 Metal Core Drill BitsDescription: The Wolfcraft 3498000 bimetal hole saw set, featuring diameters ranging from 25 to 68 mm , a cutting depth of 40 mm , and a total of 6 pieces, is the perfect solution for various installation and construction projects. This set provides everything you need, especially if you work with metal (including stainless steel), plastic materials, soft and medium-hard wood, insulation panels, and drywall panels. The 5 bimetal hole saws included in the set, with diameters of 25, 29, 35, 51 , and 68mm, are made of high-speed steel (HSS ) and are specially designed for precise drilling. With them, you can drill holes with a cutting depth of up to 55 mm. For convenience and quick installation, the drill bits are easily secured in the chuck of your drill or cordless screwdriver via the hexagonal shank. The set comes in a high-quality two- piece plastic case that ensures safe transport and proper storage of all parts. These drill bits are certified and tested by TÜV , which guarantees their high quality and safety during use. Technical specifications:Number of pieces: 6Diameter: 25-68 mmDrilling depth: 40 mmMaterial: BiM, HSSApplication: for wood, non-ferrous metals, plastic, chipboardWeight: 1.171 kg..

Wolfcraft 3896000 Wall Drill BitDescription: The Wolfcraft 3896000 carbide-tipped hole saw for brick and drywall is an innovative tool designed for precise drilling of holes in brickwork and stone. This carbide-tipped hole saw is an excellent solution for various construction and renovation projects. With it, you can adjust the cutting depth up to 55 mm and drill with ease through various types of materials. The core bit is easy to install and secure in the drill chuck thanks to its hexagonal shank. With the included centering drill bit (8 mm), hole positioning is extremely precise. This core bit is pre-assembled, ready to use, and has been tested by TÜV, which guarantees its quality and reliability. When combined with a mandrel (such as Cat. No. 3862000), the core bit becomes the ideal tool for drilling deep holes and pilot holes through repeated sequential drilling. Technical specifications:Diameter: 68 mmMaximum drilling depth: 55 mmShank: hexagonal shankRecommended speed: 1200 rpm Application: for dry drillingCutting material: diamond powderSuitable for drilling: ceramicsDimensions (L x W x H): 68 x 68 x - mmWeight: 0.427 kg..

Wolfcraft 3899000 Wall Drill BitDescription: The Wolfcraft 3899000 carbide-tipped hole saw for brick and drywall is an innovative tool designed for precise drilling of holes in brick masonry and stone. This carbide-tipped hole saw is an excellent solution for various construction and renovation projects. With it, you can adjust the cutting depth up to 55 mm and drill with ease through various types of materials. The core bit is easy to install and secure in the drill chuck thanks to its hexagonal shank. With the included centering drill bit (8 mm) , hole positioning is extremely precise. This core bit is pre-assembled, ready to use, and has been tested by TÜV , which guarantees its quality and reliability. When combined with a mandrel (such as Cat. No. 3862000), the core bit becomes the ideal tool for drilling deep holes and through-holes via multiple consecutive drilling passes. Technical specifications:Diameter: 103 mmMaximum drilling depth: 55 mmShank: hexagonal shankRecommended speed: 800 rpm Application: for dry drillingCutting material: diamond powderSuitable for drilling: ceramicsDimensions (L x W x H): 103 x 103 x - mmWeight: 0.714 kg..

Wolfcraft 5471000 Metal Core Drill BitDescription: The Wolfcraft 5471000 bimetal hole saw with a diameter of 51 mm is a versatile tool designed for drilling in various types of materials and for a wide range of projects. With a cutting depth of 40 mm , this hole saw is ideal for working with wood, metal, plastic, drywall panels, and insulation panels such as gypsum board and OSB . The hole saw is designed with user comfort in mind. It features a specially hardened, precision-engineered, and wear-resistant shank that provides stability during operation. The drill bit's teeth are made of carbide and are heat-resistant, ensuring a long service life for the tool. With an SDS-plus shank, it can be easily mounted on standard cordless screwdrivers and drills with a hexagonal shank. The various available diameters make it suitable for a wide range of projects in interior design and metal construction. The progressively arranged mixed-type teeth ensure fast and efficient drilling progress, while the included 6 mm centering drill bit facilitates precise hole positioning. Waste removal is easy thanks to the large openings. It is TUV -certified, which guarantees its quality and safety during use. Technical specifications:Diameter: 51 mmMax. drilling depth: 40 mmShank: hexagonal shankDrill bit material: HSSCutting edge material: BiMApplication: for non-impact drillingMaterial to be drilled: wood and non-ferrous metalsWeight: 0.34 kg..

Wolfcraft 5474000 Metal Core Drill BitDescription: The Wolfcraft 5474000 bimetal hole saw with a diameter of 68 mm is a versatile tool designed for drilling in various types of materials and for a wide range of projects. With a cutting depth of 40 mm , this hole saw is ideal for working with wood, metal, plastic, drywall panels, and insulation panels such as drywall and OSB . The hole saw is designed with user comfort in mind. It features a specially hardened, precision-engineered, and wear-resistant shank that provides stability during operation. The drill bit's teeth are made of carbide and are heat-resistant, ensuring a long service life for the tool. With an SDS-plus shank, it can be easily mounted on standard cordless screwdrivers and drills with a hexagonal shank. The various available diameters make it suitable for a wide range of projects in interior design and metal construction. The progressively arranged mixed-type teeth ensure fast and efficient drilling progress, while the included center drill facilitates precise hole positioning. Waste removal is easy thanks to the large openings. It is TUV -certified, which guarantees its quality and safety during use. Technical specifications:Diameter: 68 mmMax. drilling depth: 40 mmShank: hexagonal shankCutting bit material: HSSCutting edge material: BiMApplication: for non-impact drillingMaterial to be drilled: wood and non-ferrous metalsDimensions (L x W x H): 68 x 68 x - mm Weight: 0.34 kg..

Wolfcraft 5949000 Ceramic Drill BitDescription: The Wolfcraft 5949000 ceramic and porcelain tile drill bit is an excellent solution for all your drilling needs in ceramic, terracotta, and other types of tiles. Its "Ceramic" diamond grit makes it the ideal tool for precise and easy drilling in all types of tiles, both on walls and floors. The core bit features an M14 thread, making it compatible with standard angle grinders for convenient and effortless use. Ideal for a variety of applications such as installing plumbing fixtures or drilling cable passages. It is suitable for working with a variety of materials, including ceramic tiles, earthenware tiles, stoneware tiles, porcelain tiles, marble tiles, as well as floor and wall tiles. Technical specifications:Diameter: 68 mmMaximum drilling depth: 45 mmShank: M14 threadApplication: for dry drillingCutting material: diamond powderSuitable for drilling: ceramicsWeight: 0.259 kghttps://youtu.be/tGhtBXCk-ZI?si=iLGDbUJgFoinPV01..

Wolfcraft 8771000 Ceramic Drill Bit SetDescription: The Wolfcraft 8771000 ceramic and porcelain tile drill bit set, with diameters ranging from 5 to 10 mm , consists of 7 pieces designed for extremely precise drilling in various hard materials. This set of diamond core bits offers reliability and efficiency when drilling and is ideal for plumbing and other construction projects. The core bits come in diameters of 5, 6, 8, and 10 mm, making them suitable for a variety of tasks. They are specially designed for drilling holes in ceramic tiles, porcelain, and porcelain stoneware. Their cutting edge is coated with high-quality industrial diamonds, which ensure fast and precise drilling even in the hardest materials. Ideal for working with tiles, fine stone products, ceramics, porcelain, porcelain stoneware, and glazed tiles. The set also includes a sponge guide for water cooling, which helps maintain a low temperature during drilling and extends the life of the drill bits. The set also includes 2 chucks, which ensure precise and safe drilling. Technical specifications:Number of pieces: 7Core bit diameter: 5-10 mm (5, 6, 8, 10)Shank: 10 mm (cylindrical shank)Application: for ceramic, earthenware, terracotta, and porcelainWeight: 0.82 kgSet includes:1 x 5 mm drill bit1 x 6 mm core bit1 x 8 mm drill bit1 x 10 mm core bit1 x Sponge guide2 x Suction cupshttps://youtu.be/Lgpe_xiGKk8?si=uEHayWKQuqRGtru1..