Vermin - Page 21

Milwaukee 4932493973 Metal Countersink, HSS-Co, 16.5 mm, 90° Milwaukee 4932493973 is a conical countersink for metal, 16.5 mm in diameter with a 90° included angle. The material is HSS-Co - cobalt high-speed steel. It has three flutes and a plain cylindrical shank. What a countersink does After drilling in metal the edge of the hole is left burred and sharp. The countersink takes that off in one pass. Its second and more common job is to cut a seat for a countersunk screw head, so the head sits flush with the surface. The 90° cone matches metric countersunk screws such as those to DIN 7991. Why HSS-Co rather than plain HSS Cobalt in the alloy raises the heat resistance of the cutting edge. Countersinking is a low-speed operation with a large contact area - exactly the conditions in which the tip gets hot. Plain HSS starts to lose hardness around 550 °C; HSS-Co holds on longer, which makes a real difference in stainless steel, cast iron and alloy steels. In soft material you barely notice the difference - the advantage shows up where it is needed. Three flutes The countersink has three cutting edges. That is the standard arrangement for a clear reason: with an odd number of edges the tool does not fall into resonance and does not leave the polygonal marks a two-edge tool produces. The result is a round, smooth seat. Working with it properly Countersinking is a low-speed, steady-pressure operation. The commonest mistake is the opposite - high speed, at which the countersink starts to chatter and leaves a wavy surface. In steel, work with cutting oil, which besides cooling stops swarf welding onto the cutting edge. Technical specifications ManufacturerMilwaukee Article number4932493973 TypeConical countersink for metal Diameter16.5 mm Angle90° MaterialHSS-Co (cobalt high-speed steel) Cutting edges3 ShankCylindrical Quantity1 piece Questions and Answers What is a countersink used for? For deburring a drilled hole and for cutting a seat for a countersunk screw head so the head finishes flush with the surface. What is the difference between HSS and HSS-Co? Cobalt raises the heat resistance of the cutting edge. Plain HSS starts losing hardness around 550 °C; HSS-Co holds on longer, which tells in stainless steel, cast iron and alloy steels. Why three flutes? With an odd number of edges the tool does not fall into resonance and avoids the polygonal marks a two-edge countersink leaves. The seat comes out round and smooth. What speed should it run at? Low speed with steady pressure. The commonest mistake is the opposite - at high speed the countersink chatters and leaves a wavy surface. Is cutting fluid needed? In steel, yes. Oil cools and stops swarf welding onto the cutting edge, which is the main reason a countersink starts cutting unevenly. What is the largest seat it can cut? The countersink is 16.5 mm across, which is the maximum seat diameter it can produce. The hole beneath it has to be smaller than that. Will it work in wood and plastic? It will, though it is designed for metal. In soft materials keep the speed low - run fast and the countersink melts plastic instead of cutting it. ..

Milwaukee 4932493970 Metal Countersink, HSS-Co, 8.3 mm, 90° Milwaukee 4932493970 is a conical countersink for metal, 8.3 mm in diameter with a 90° included angle. The material is HSS-Co - cobalt high-speed steel. It has three flutes and a plain cylindrical shank. What a countersink does After drilling in metal the edge of the hole is left burred and sharp. The countersink takes that off in one pass. Its second and more common job is to cut a seat for a countersunk screw head, so the head sits flush with the surface. The 90° cone matches metric countersunk screws such as those to DIN 7991. Why HSS-Co rather than plain HSS Cobalt in the alloy raises the heat resistance of the cutting edge. Countersinking is a low-speed operation with a large contact area - exactly the conditions in which the tip gets hot. Plain HSS starts to lose hardness around 550 °C; HSS-Co holds on longer, which makes a real difference in stainless steel, cast iron and alloy steels. In soft material you barely notice the difference - the advantage shows up where it is needed. Three flutes The countersink has three cutting edges. That is the standard arrangement for a clear reason: with an odd number of edges the tool does not fall into resonance and does not leave the polygonal marks a two-edge tool produces. The result is a round, smooth seat. Working with it properly Countersinking is a low-speed, steady-pressure operation. The commonest mistake is the opposite - high speed, at which the countersink starts to chatter and leaves a wavy surface. In steel, work with cutting oil, which besides cooling stops swarf welding onto the cutting edge. Technical specifications ManufacturerMilwaukee Article number4932493970 TypeConical countersink for metal Diameter8.3 mm Angle90° MaterialHSS-Co (cobalt high-speed steel) Cutting edges3 ShankCylindrical Quantity1 piece Questions and Answers What is a countersink used for? For deburring a drilled hole and for cutting a seat for a countersunk screw head so the head finishes flush with the surface. What is the difference between HSS and HSS-Co? Cobalt raises the heat resistance of the cutting edge. Plain HSS starts losing hardness around 550 °C; HSS-Co holds on longer, which tells in stainless steel, cast iron and alloy steels. Why three flutes? With an odd number of edges the tool does not fall into resonance and avoids the polygonal marks a two-edge countersink leaves. The seat comes out round and smooth. What speed should it run at? Low speed with steady pressure. The commonest mistake is the opposite - at high speed the countersink chatters and leaves a wavy surface. Is cutting fluid needed? In steel, yes. Oil cools and stops swarf welding onto the cutting edge, which is the main reason a countersink starts cutting unevenly. What is the largest seat it can cut? The countersink is 8.3 mm across, which is the maximum seat diameter it can produce. The hole beneath it has to be smaller than that. Will it work in wood and plastic? It will, though it is designed for metal. In soft materials keep the speed low - run fast and the countersink melts plastic instead of cutting it. ..

Milwaukee 4932352367 Metal Drill BitDescription: The Milwaukee 4932352367 metal drill bit is a high-quality drill bit made of high-speed steel (HSS-G ) and designed to provide fast and efficient drilling. The drill bit has a diameter of 10 mm and a total length of 133 mm . The Thunderweb design features a tapered core that increases in thickness toward the rear of the drill bit. Standard drill bits have a uniform thickness along their entire length. The Thunderweb flute quickly removes excess material without building up stress at the tip. It dissipates heat more effectively, thereby extending service life. The drill bits have a 135° split point, which helps ensure a precise start and prevents slipping on the material's surface. The polished surface reduces friction. Impact-resistant ABS body with added rubber corner protection. Technical specifications:Brand: Milwaukee;Diameter: 10 mm;Working length: 87 mm;Length: 133 mm;Packaging (pcs): 1 pc;Material: HSS - G;Application: for metal;Standard: D338;Characteristics: ground;Drill shank type: cylindrical. ..

Milwaukee 48894709 Metal Drill BitDescription: The Milwaukee 48894709 metal drill bit is a twist drill from the Shockwave HSS-G TiN Red Hex series, designed to withstand impact and optimized for use with impact drivers. Specially designed for drilling in various materials such as steel, steel alloys, cast iron, graphite, bronze, brass, and aluminum, the drill bit features high breakage resistance and a long service life. The shank features a 1/4" hex drive, making it compatible with various types of tools. The drill bit has a diameter of 4.2 mm , a working length of 28 mm , and a total length of 74 mm . With the MILWAUKEE Shockwave Red Hex , you can successfully tackle a variety of drilling tasks in metal materials. Technical specifications:Diameter: 4.2 mmLength: 74 mm Working length: 28 mmShank: 1/4" hex shank (E 6.3)Material: HSS-G TiN Application: for steel and steel alloys, cast iron, graphite, bronze, brass, and aluminumQuantity per package: 1 pcDimensions (L x W x H): 74 x 4.2 x 4.2 mmWeight: 0.021 kg..

Milwaukee 48894729 Metal Drill BitDescription:The Milwaukee 48894729 metal drill bit is a high-quality twist drill optimized for use with impact drivers. The Shockwave HSS-G TiN Red Hex model is designed with exceptional durability and fracture resistance, making it suitable for drilling in various materials, including steel, steel alloys, cast iron, graphite, bronze, brass, and aluminum. The drill bit features a 1/4" hex shank for stability during operation, a diameter of 13 mm, a working length of 83 mm, and a total length of 130 mm. This makes it a reliable choice for a variety of applications requiring precision and efficiency.Technical specifications:Diameter: 13 mmLength: 130 mmWorking length: 83 mmShank: 1/4" hex shank (E 6.3)Material: HSS-G TiNApplication: for steel and steel alloys, cast iron, graphite, bronze, brass, and aluminumDimensions (L x W x H): 130 x 13 x 13 mmWeight: 0.075 kg..

Milwaukee 4932363284 Metal Drill BitDescription: The Milwaukee 4932363284 metal drill bit is made of durable and heat-resistant 5% cobalt-alloyed high-speed steel, manufactured in accordance with DIN 338. It is suitable for drilling high-alloy steels and metals with a tensile strength above 1000 N/mm2, such as stainless steel. The QUAD EDGETM tip features a 135° point and four cutting edges, ensuring a precise and fast start to drilling without wobbling and reducing heat build-up for a longer service life. The innovative flute geometry allows for faster material removal, helps the drill run cooler, and prevents tip breakage. It ensures a secure grip in the chuck and is bronze-colored. Technical specifications:Diameter: 12 mmLength: 151 mmWorking length: 101 mmCutting edges: 4Tip angle: 135°Material: HSSGCStandard: DIN 338Suitable for: high-alloy steels and metals..

Milwaukee 4932493865 Metal Drill Bit SetDescription: The Milwaukee 4932493865 metal drill bit set, consisting of 10 pieces, is specially designed for optimal performance with impact drivers. These drill bits feature a 1/4'' hex shank and are made of high-quality HSS steel with a titanium nitride coating, making them ideal for high-speed use. The Quad Edge tip is an innovative combination of a 135° split point and 4 cutting edges that generate fewer chips and prevent heat buildup, ensuring a longer drill life and more efficient operation. The spiral flute has a variable geometry, which helps to evacuate material more quickly and keeps the drill bit cooler during drilling. It delivers exceptional performance and durability, suitable for a variety of applications and materials. Technical specifications:Diameter: 3-10 mmShank: 1/4'' hex shankMaterial: HSS-G TiNApplication: aluminum, metal, steel, cast ironDrill bit tip: 135°Set includes:10 x ⌀ 3 / 3.5 / 4 / 4.5 / 5 / 6 / 7 / 8 / 9 / 10 mm..

Milwaukee 4932493866 Metal Drill Bit SetDescription: The Milwaukee 4932493866 metal drill bit set, consisting of 19 pieces, is specially designed for optimal performance with impact drivers. These drill bits feature a 1/4'' hex shank and are made of high-quality HSS steel with a titanium nitride coating, making them ideal for high-speed use. The Quad Edge tip is an innovative combination of a 135° split point and 4 cutting edges that generate fewer chips and prevent heat buildup, ensuring a longer drill life and more efficient operation. The spiral flute has a variable geometry, which helps evacuate material more quickly and keeps the drill bit cooler during drilling. This 19-piece set delivers exceptional performance and durability, suitable for a variety of applications and materials. Technical specifications:Diameter: 2.0 - 10 mmShank: 1/4'' hex shankMaterial: HSS-G TiNApplication: aluminum, metal, steel, cast ironDrill point: 135°Direction: right-handWeight: 7.8 kgSet includes:1 x 2.0 mm drill bit1 x 2.5 mm drill bit2 x 3.0 mm drill bit1 x 3.5 mm drill bit2 x 4.0 mm drill bit1 x 4.5 mm drill bit1 x 5.0 mm drill bit1 x 5.5 mm drill bit1 x 6.0 mm drill bit1 x 6.5 mm drill bit1 x 7.0 mm drill bit1 x 7.5 mm drill bit1 x 8.5 mm drill bit1 x 9.0 mm drill bit1 x 9.5 mm drill bit1 x 10 mm drill bit..

Milwaukee 4932493868 Metal Drill Bit SetDescription: The Milwaukee 4932493868 metal drill bit set is specially designed for drilling high-alloy steels and high-tensile metals, such as stainless steel. The drill bits are made of durable and heat-resistant 5% cobalt-alloyed high-speed steel, manufactured in accordance with DIN 338. The QUAD EDGETM tip features a unique combination of a 135° split point and four cutting edges. The centering tip allows for a precise and quick start to drilling without deviation, while the four cutting edges create smaller chips, which prevents heat buildup and extends the drill bit's life. The innovative flute geometry ensures faster chip evacuation and helps the drill stay cooler. This drill bit set is a reliable solution for professional drilling needs in heavy metals and high-alloy materials. Technical specifications:Diameter: 1-13 mmShank: 1/4''cylindricalMaterial: HSS-CoApplications: aluminum, metal, steel, cast ironDrill bit tip: 135°Standard: DIN 338Direction: rightWeight: 8.376 kgSet includes:1 x drill bit ⌀ 1 mm1 x drill bit ⌀ 1.5 mm1 x drill bit ⌀ 2 mm1 x drill bit ⌀ 2.5 mm1 x 3 mm drill bit1 x drill bit ⌀ 3.5 mm1 x drill bit ⌀ 4 mm1 x drill bit ⌀ 4.5 mm1 x drill bit ⌀ 5 mm1 x drill bit ⌀ 5.5 mm1 x drill bit ⌀ 6 mm1 x drill bit ⌀ 6.5 mm1 x drill bit ⌀ 7 mm1 x drill bit ⌀ 7.5 mm1 x drill bit ⌀ 8 mm1 x drill bit ⌀ 8.5 mm1 x drill bit ⌀ 9 mm1 x drill bit ⌀ 9.5 mm1 x drill bit ⌀ 10 mm1 x drill bit ⌀ 10.5 mm1 x drill bit ⌀ 11 mm1 x drill bit ⌀ 11.5 mm1 x drill bit ⌀ 12 mm1 x drill bit ⌀ 12.5 mm1 x drill bit ⌀ 13 mm..

Milwaukee 4932493869 Metal Drill Bit SetDescription: The Milwaukee 4932493869 19-piece metal drill bit set is specially designed for optimal performance with impact drivers. These drill bits are made of high-quality HSS steel, making them ideal for high-speed use. The Quad Edge tip is an innovative combination of a 135° point and 4 cutting edges that generate fewer chips and prevent heat buildup, ensuring a longer drill life and more efficient performance. The spiral flute has a variable geometry, which helps to evacuate material more quickly and keeps the drill bit cooler during drilling. Technical specifications:Diameter: 1-10 mmMaterial: HSS-GApplication: aluminum, metal, steel, cast ironDrill point: 135°Standard: DIN 338Shank: cylindricalSet includes:19 x ⌀ 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 mm..

Milwaukee 4932493870 Metal Drill Bit SetDescription: The Milwaukee 4932493870 metal drill bit set features the unique THUNDERWEB design, which increases durability compared to standard drill bits. The drill bit's geometry ensures rapid removal of hot chips and better heat dissipation, which significantly extends their service life. The 135° split point allows for precise drilling initiation without sliding across the material's surface, while the polished surface reduces friction and extends the drill bit's life. They come in a shock-resistant ABS case with added rubber corner protection, providing extra durability and protection for the drill bits. Designed to withstand higher pressure and torque, which reduces the risk of breakage, making them ideal for professional and industrial applications requiring high durability and performance when drilling metal. The Milwaukee 4932493870 metal drill bit set offers exceptional strength, durability, and efficiency, making it the ideal choice for working with hard materials and in demanding conditions. Technical Specifications:Diameter: 1.0 - 13 mmShank: 1/4'' cylindrical shankMaterial: HSS-GApplications: aluminum, wood, sheet metal, metal, plastic, steel, cast ironDrill point: 135°DIN standard: 338Direction: right-handWeight: 16.6 kgSet includes:1 x Drill bit 1.0 x 34 mm1 x Drill bit 1.5 x 40 mm1 x Drill bit 2.0 x 49 mm1 x Drill bit 2.5 x 57 mm1 x Drill bit 3.0 x 61 mm1 x Drill bit 3.5 x 70 mm1 x Drill bit 4.0 x 75 mm1 x Drill bit 4.5 x 80 mm1 x Drill bit 5.0 x 86 mm1 x Drill bit 5.5 x 93 mm1 x Drill bit 6.0 x 93 mm1 x Drill bit 6.5 x 101 mm1 x Drill bit 7.0 x 109 mm1 x Drill bit 7.5 x 109 mm1 x Drill bit 8.0 x 117 mm1 x Drill bit 8.5 x 117 mm1 x Drill bit 9.0 x 125 mm1 x Drill bit 9.5 x 125 mm1 x Drill bit 10 x 133 mm1 x Drill bit 10.5 x 133 mm1 x Drill bit 11 x 142 mm1 x Drill bit 11.5 x 142 mm1 x Drill bit 12 x 151 mm1 x Drill bit 12.5 x 151 mm1 x Drill bit 13 x 151 mm..

Milwaukee 4932471101 Drill Bit for Various MaterialsFeatures: The Milwaukee 6.5 x 200 mm universal drill bit, with a working length of 140 mm, is designed with a carbide tip featuring two flutes to ensure durability and versatility when drilling through hard materials, including concrete, brick, roof tiles, thin metal, ceramics, tiles, wood, PVC, aluminum, drywall, and more. The drill bit features a 1/4" hex shank that prevents the tool from slipping during operation. Compatible with hammer drills, screwdrivers, and impact drivers. Ideal for drilling through layered materials. The drill bit flutes are painted white for easy identification in the user's toolbox. https://youtu.be/dzeF03Q6tLU..

Milwaukee 4932471096 Drill Bit for Various MaterialsFeatures: The Milwaukee 6x100mm universal drill bit, with a working length of 50mm, is designed with a carbide tip featuring 2 flutes to ensure durability and flexibility when drilling through hard materials including concrete, brick, roof tiles, thin metal, ceramics, tiles, wood, PVC, aluminum, drywall, and more. The drill bit features a 1/4" hex shank that prevents the tool from slipping during operation. Compatible with hammer drills, screwdrivers, and impact drivers. Ideal for drilling into layered materials. The drill bit flutes are painted white for easy identification in the user's toolbox. https://youtu.be/dzeF03Q6tLU..

Milwaukee MX4 SDS-PLUS Concrete Drill Bit Ø10 x 100 mm x 160 mm • 4 cutting edges at 90° for perfectly round holes and optimal anchor retention. • Centering tip for easy drilling with greater precision. • Welded carbide tip at 5-8 mm for higher speed and extended life. https://www.youtube.com/watch?v=2jaC6pnICAc..

Milwaukee MX4 SDS-PLUS Concrete Drill Bit Ø7 x 50 mm x 115 mm• 4 cutting edges at 90° for perfectly round holes and optimal anchor hold. • Centering tip for easy drilling with greater precision. • Welded carbide tip at 5-8 mm for higher speed and extended life. https://www.youtube.com/watch?v=2jaC6pnICAc..

Milwaukee MX4 SDS-PLUS Concrete Drill Bit Ø8 x 150 mm x 215 mm• 4 cutting edges at 90° for perfectly round holes and optimal anchor retention. • Centering tip for easy drilling with greater precision. • Welded carbide tip at 5-8 mm for higher speed and extended life. https://www.youtube.com/watch?v=2jaC6pnICAc..

Milwaukee 4932492652 Extended Impact Socket Set (Promotional)Description: The Milwaukee 4932492652 Extended Impact Socket Set is made of high-quality alloy steel and comes in a convenient plastic case for easy storage and transport. The sizes of the sockets are laser-engraved for durability and easy identification in the toolbox. Technical Specifications:Model: 4932492652Drive: 1/2"Sizes: 10, 11, 12, 13, 14, 17, 19, 21, 22, 24 mmQuantity per package: 12 pcsSet includes:10 x deep sockets: 10, 11, 12, 13, 14, 17, 19, 21, 22, 24 mm1/2" universal impact joint1/2" 150 mm impact extension..