Filter
Your Cart

Spare parts - Page 1

Electric Motors for Machinery, Equipment..
Brackets for repair, installation, and r..
DeWALT Replacement Parts - for Maximum R..
Makita Replacement Parts - Maintain the ..
Milwaukee Replacement Parts - Reliabilit..
Brand: Dewalt Stock: In Stock
The Milwaukee 4932478737 5-piece Tri-Lobe screwdriver set is made from high-quality materials, ensuring high durability and longevity. Strongly magnetized tips for secure holding of fasteners. CNC-milled tips ensure a tight and precise fit on fasteners. Black phosphate coating for grip and corrosion resistance. A slim shaft diameter allows easy access to hard-to-reach areas, and a two-component soft grip ensures a secure, non-slip hold. Innovative 3-sided anti-roll design for the screwdrivers. The set includes 4 screwdrivers, which are VDE-tested up to 10,000 V and rated up to 1,000 V, as well as a phase tester...
28.79€
Ex Tax:23.99€
Add to Cart
Brand: Makita Stock: In Stock
For models: GA9020, GA7020 Makita angle grinder arm 517793-7 for GA9020, GA7020..
71.45€
Ex Tax:59.54€
Add to Cart
Brand: Bosch Stock: In Stock
BOSCH 1619P02870 Angle Grinder BrushesDescription: The BOSCH 1619P02870 angle grinder brushes are designed to ensure the reliable operation of BOSCH electric tools by providing stable contact with the armature (rotor) of the electric motor. The brushes are a consumable part that wears out over time, but their quality is key to the tool's normal operation and long service life. As an original BOSCH replacement part, they are manufactured with increased resistance to load and wear, which helps ensure smooth motor operation and reduces the risk of overheating during prolonged use. The set is equipped with a switch that automatically disconnects the armature when the permissible wear limit is reached, providing additional protection for the machine. Technical specifications: For models: GWS 7-115, GWS 7-115 E, GWS 7-125, GOP 250 CE..
4.69€
Ex Tax:3.91€
Add to Cart
Brand: Black and Decker Stock: In Stock
Gear Set for Black+Decker CD500 Angle Grinder, 661243-00DescriptionThe Black+Decker 661243-00 is an original gear set designed as a replacement part for the Black+Decker CD500 angle grinder. It transfers power from the motor to the spindle and is intended to replace worn or damaged gears, restoring the tool's proper operation. Manufactured to original Black+Decker specifications, the gear set ensures precise fit, reliable performance, and full compatibility with the designated model. It is ideal for servicing, maintenance, and repair of compatible angle grinders.Technical Specifications Brand: Black+Decker Type: Gear set Application: Replacement part for angle grinder Compatible model: Black+Decker CD500 Material: Hardened steel Purpose: Replacement of worn or damaged gears Package Includes 1 set of Black+Decker 661243-00 gears..
-20%
9.52€ 11.96€
Ex Tax:7.93€
Add to Cart
Brand: Dewalt Stock: In Stock
DEWALT N880093 Impact Wrench AnvilDescription: The DEWALT N880093 impact wrench anvil is located at the front of the machine. The working tool is placed on it. Technical specifications:Compatible with: DCF899..
40.56€
Ex Tax:33.80€
Add to Cart
Brand: Dewalt Stock: In Stock
Compatible with model: DWE6423 ..
10.86€
Ex Tax:9.05€
Add to Cart
Brand: Makita Stock: In Stock
Makita YA00000746 Electric Lawn Mower BladeDescription: The Makita YA00000746 electric lawn mower blade is 37 cm long and designed for the Makita ELM3720 electric lawn mower . It is made of high-quality, wear-resistant steel , which ensures precise cutting and a long service life . Technical specifications:Blade length: 37 cmMaterial: powder-coated steel..
-26%
10.50€ 14.11€
Ex Tax:8.75€
Add to Cart
Brand: Dewalt Stock: Delivery in 1-3 days
Compatible with model: DWC410 ..
0.98€
Ex Tax:0.82€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch Protection Sleeve Set for Rotary Hammer, 1617000582DescriptionThe Bosch 1617000582 is a genuine protection sleeve set designed for compatible Bosch rotary hammers. The kit is intended to replace worn or damaged components around the chuck assembly, helping maintain reliable tool operation and protecting the internal mechanism. Manufactured to Bosch's original OEM specifications, the set provides an accurate fit and full compatibility with supported rotary hammer models. Using genuine Bosch spare parts helps ensure dependable performance and simplifies servicing. The Bosch 1617000582 is an ideal replacement kit for professional service technicians and users maintaining compatible Bosch rotary hammers.Technical Specifications Brand: Bosch Part Number: 1617000582 Type: Protection sleeve set Application: Rotary hammer spare part OEM Part: Yes Compatibility: For compatible Bosch rotary hammers Package Includes 1 x Bosch Protection Sleeve 1617000582..
8.50€
Ex Tax:7.08€
Add to Cart
Stock: In Stock
Bosch 1619P16119 Upper Ball BearingBosch 1619P16119 is an original replacement part, listed in catalogs as a groove ball bearing, designed for use in Bosch tools and Bosch-based equipment. The part is identified by the exact number 1619P16119, which serves as the primary order code and matches the parts in the diagram.ApplicationThe bearing is used in assemblies with rotating shafts, where it facilitates smooth movement and reduces friction between moving parts. In available schematics and descriptions, it is listed for Bosch hammer drills and related machines, as well as for Bosch-based ATCO equipment.Practical AdvantagesThis part is available as a single unit and is intended as an exact replacement for a worn or damaged bearing with the same part number. No published dimensions or other specific technical parameters are available, so compatibility must be verified using the exact part number 1619P16119 and the corresponding service diagram.It is suitable for service shops, repair centers, and technical users seeking an original Bosch replacement part for a specific application...
7.00€
Ex Tax:5.83€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch Angle Grinder Guard Ø125 mm, article 1 600 A02 5XR A genuine Bosch protective guard for angle grinders taking a Ø125 mm disc. A service spare part, position 651 in the exploded diagram. Pressed steel with a silver finish and a coded toothed collar. The size is 125 mm - check your machine This is the critical point when ordering. The guard is only for machines with a 125 mm disc. It does not fit 115 mm, and it does not fit 230 mm. The diameter is on the part itself - the factory label in the photograph reads "Ø125". For GRINDING, not cutting The factory label carries a crossed-out cutting disc pictogram. This is a grinding guard - open at the bottom, with no closing plate. Cutting calls for a different guard, closed, which directs sparks and debris downwards. If you work with a diamond or cut-off wheel, this is not the right article. Which machines it fits Confirmed models: GWS 8-125, GWS 10-125, GWS 11-125 CI / CIH, GWS 12-125 / 12-125 S / 12-125 CIPX, GWS 13-125 CIE, GWS 14-125 CI / CIE, GWS 15-125 CIE / CIEH / CIPX / CIH, GWS 17-125 CI / CIE, GWS 18-125 PL INOX, GWS 19-125 CIE, GWS 1000, GWS 1100, GWS 1400, GWS 18V-10 / 18V-10 C / 18V-10P, GWX 9-125 S, GWX 750-125, GWX 19-125 S, GWX 180-LI, GWX 18V-7, GWX 18V-10P, GWX 18V-10 PSC, BAG 125-1. The PWS range is not confirmed. No catalogue or service list shows this number against a PWS machine. The green DIY range uses different guards. If your machine is a PWS, check the number against your own model's diagram before ordering. Previous article number This article supersedes 1600A00XK9. If you are searching by the old number, this is the same part. It is also written 1 600 A02 5XR and 1600A025XR-B17. What we do not publish Bosch does not list this number in its general catalogue - it lives only in the service parts lists. So there is no official EAN for it and no published collar diameter. We do not invent them. The clamping method (screw or keyless) is likewise not separately confirmed for this number - match it against the guard you are removing. What is in the delivery 1 x Bosch Ø125 mm protective guard, article 1600A025XR A single part. No screws, no clamps and no machine. Technical specifications Typeprotective guard for angle grinders Article number1600A025XR (written commercially 1 600 A02 5XR) Previous article number1600A00XK9 Also written1600A025XR-B17 Disc diameter125 mm Usegrinding - NOT cutting Position in the exploded diagram651 Materialpressed steel, silver finish Mountingcoded toothed collar Compatible rangesBosch GWS and GWX (incl. X-LOCK) PWS rangenot confirmed EANnot published by the manufacturer Collar diameternot published by the manufacturer Scope1 pc, no screws or clamps Questions and Answers What disc diameter is it for? 125 mm. The diameter is on the factory label on the part itself - the photograph shows "Ø125". It does NOT fit 115 mm or 230 mm machines. Can it be used for cutting? No. The label carries a crossed-out cutting disc pictogram. This is a grinding guard, open at the bottom. Cutting calls for a closed guard that directs sparks and debris downwards. Which machines does it fit? Bosch GWS and GWX angle grinders with a 125 mm disc - for example the GWS 14-125 CI, GWS 17-125 CIE, GWS 18V-10, GWX 19-125 S and GWX 18V-10 PSC. The full list is in the description. Does it fit a PWS? Not confirmed. No service list shows this number against a PWS machine - the green DIY range uses different guards. Check the number against your own model's diagram. What is the old number? 1600A00XK9. This article supersedes it - the same part with a new number. Why is there no EAN? Bosch does not publish this number in its general catalogue - it is a service number and appears only in spare parts lists. No official EAN exists for it. Barcodes seen at some retailers are their own. Are screws included? No. The guard only is supplied, 1 piece. Clamping hardware is taken from the old guard or ordered separately from the machine's diagram. ..
7.56€
Ex Tax:6.30€
Add to Cart
Brand: Makita Stock: In Stock
Brush Holder Cap for MAKITA Machines 643954-4Description: Brand-name. As an original spare part, it ensures proper brush positioning and protects internal components from contamination and loosening during operation. The cap is compatible with MAKITA models 6343D, 6347D, 8443D, BDF460, BGA450, BGA452, BHP460, BPJ140, and BUC121, making it a suitable choice for the maintenance and repair of various cordless tools. Technical Specifications: For models: 6343D, 6347D, 8443D, BDF460, BGA450, BGA452, BHP460, BPJ140, BUC121, BUC122, DGA452, DUC122..
-5%
1.25€ 1.31€
Ex Tax:1.04€
Add to Cart
Brand: Makita Stock: In Stock
Brush Holder for MAKITA 638921-2 Angle GrinderDescription: The MAKITA 638921-2 brush holder for angle grinders, designed for cordless angle grinders and sheet metal shears, is intended to ensure stable and proper positioning of the carbon brush in the machine. As a component of MAKITA cordless tools, the brush holder serves to securely hold the brush and ensures optimal contact with the rotor, which is essential for trouble-free operation and a long service life of the tool. The original design ensures full compatibility and reliability when replacing the brush holder. Technical specifications: For models: BGA450, BGA452, BGD800, BJS101, BJS161, DGA45..
-1%
4.00€ 4.05€
Ex Tax:3.33€
Add to Cart
Brand: Dewalt Stock: In Stock
DeWALT DDF6755000 Cable ClampDescription: The DeWALT DDF6755000 cable mounting clip is designed for use with the Dewalt DCN890 direct mounting gun. Technical specifications:Size: 50 mmFor use with: DCN890Quantity per package: 1 pc..
0.99€
Ex Tax:0.83€
Add to Cart
Brand: Dewalt Stock: In Stock
DeWalt N601077 Staple GaugeDescription: The Dewalt N601077 nail guide is a replacement part designed for the replacement and maintenance of DeWALT cordless pneumatic nailers. It is used to properly guide and position nails, ensuring reliable feeding and precise operation of the tool. Technical Specifications:Compatibility: for DCN692, DCN695..
79.68€
Ex Tax:66.40€
Add to Cart
Brand: Dewalt Stock: In Stock
DeWALT Carbon Brushes N418039DescriptionThe DeWALT N418039 is a genuine set of carbon brushes designed as a replacement part for compatible DeWALT rotary hammers and other power tools. The brushes restore proper electrical contact between the motor and armature, helping maintain reliable performance and extending the service life of the tool. Manufactured to DeWALT's original specifications, the N418039 brush set provides precise fit and dependable compatibility with supported models. Replacing worn carbon brushes at the appropriate time helps preserve motor efficiency and reduces unnecessary wear on internal components. The DeWALT N418039 is an ideal replacement for professional service technicians and users who maintain their tools with genuine DeWALT spare parts.Technical Specifications Brand: DeWALT Type: Carbon brushes Application: Replacement part for power tools Compatibility: Compatible DeWALT rotary hammers and other power tools Part type: Genuine replacement part Package Includes 2 x DeWALT Carbon Brushes N418039..
10.80€
Ex Tax:9.00€
Add to Cart
Brand: Dewalt Stock: In Stock
DEWALT N915018 Reciprocating Saw ClampDescription: The DEWALT N915018 Reciprocating Saw Clamp is designed to ensure stable and secure blade retention during operation. Mounted on the blade strip, the clamp plays a key role in securely holding the blade to the machine, preventing unwanted loosening and contributing to precise and safe cutting. As a genuine DEWALT replacement part, it guarantees precise compatibility, proper operation, and durability under heavy use. Technical Specifications: For models: DWE396, DWE397, DWE398..
18.47€
Ex Tax:15.39€
Add to Cart
Brand: Dewalt Stock: In Stock
DEWALT N915019 Reciprocating Saw ClampDescription: The DEWALT N915019 Reciprocating Saw Clamp is designed to ensure stable and secure blade retention during operation. Mounted on the blade strip, the clamp plays a key role in securely holding the blade to the machine, preventing unwanted loosening and contributing to precise and safe cutting. As a genuine DEWALT replacement part, it guarantees exact compatibility, proper operation, and durability under heavy use. Technical Specifications: For models: DWE396, DWE397, DWE398..
18.47€
Ex Tax:15.39€
Add to Cart
Brand: Dewalt Stock: In Stock
Suitable for model: DWE4246, DWE4257 ..
25.08€
Ex Tax:20.90€
Add to Cart
Brand: Dewalt Stock: In Stock
Dewalt N192671 Nailer CoverDescription: The Dewalt N192671 stapler cover is a replacement part designed for the replacement and maintenance of DeWALT cordless staplers. It is used to protect internal components and restore normal tool operation in the event of wear or damage to the original cover. Technical Specifications:Compatibility: DCN692, DCN693, DCN694, DCN695..
0.96€
Ex Tax:0.80€
Add to Cart
Showing 1 to 20 of 2008 (101 Pages)
Spare parts

Spare parts

Spare Parts - Reliability, Durability, and Restoration of Full Functionality

Spare parts are an essential element for the maintenance, repair, and extension of the service life of various machines, tools, and equipment. Whether it's construction machinery, power tools, garden equipment, or industrial machinery, high-quality spare parts ensure optimal performance, reduce the risk of breakdowns, and save significant costs on new purchases. With the right components, you can easily restore the original efficiency and safety of any machine.

In the "Spare Parts" category, you'll find a wide range of products that meet various needs-from basic parts to specialized components for professional use.


What does the "Spare Parts" category include?

  • Spare parts for power tools: Brushes, chucks, cables, gears, and bearings.

  • Spare parts for garden equipment: Lawn mower blades, chainsaw chains, starters, air filters.

  • Spare parts for cleaning equipment: Hoses, filters, brushes for pressure washers and vacuum cleaners.

  • Spare parts for compressors and pneumatic tools: Regulators, valves, seals.

  • Specialized components for construction machinery: Replacement belts, bearings, working parts, and accessories.

  • Consumables and accessories: For regular maintenance and preventive care.


Key features of high-quality spare parts

  • High compatibility: A perfect fit for the respective tool or machine;

  • Durable materials: For long-lasting use and load resistance;

  • Certified quality: Guaranteed safety and reliability during operation;

  • Easy installation and replacement: For quick restoration of operational capability;

  • Optimal price-quality ratio: For an effective investment in maintenance.


Benefits of using genuine, high-quality replacement parts

  • Extend the service life of equipment and tools;

  • Restore full equipment functionality;

  • Reduce the risk of breakdowns and additional damage;

  • Save on the cost of new equipment;

  • Ensure greater safety during operation.


How to choose the right replacement parts?

When choosing, consider:

  • The make and model of the machine or tool;

  • The technical specifications and compatibility of the parts;

  • The need for original or compatible alternatives;

  • The operating conditions and workload of the device;

  • The manufacturer's recommendations regarding maintenance and component replacement.


Why choose spare parts from us?

In our online store, you will find:

  • A wide range of spare parts for various machines and tools;

  • Products from trusted manufacturers with guaranteed quality;

  • Competitive prices and fast delivery;

  • Professional advice on selecting the most suitable components;

  • Support for a wide variety of models and brands.


Ensure a long service life, trouble-free operation, and maximum efficiency for your machines and tools-choose spare parts from our selection and keep working without interruptions!

Product Filter