Your Cart

Makita 1914R6-0 Trimmer Head Tap & Go, 2.4 mm x 3 m Line, M8/M10 x 1.25 LH, Low Profile

Makita 1914R6-0 Trimmer Head Tap & Go, 2.4 mm x 3 m Line, M8/M10 x 1.25 LH, Low Profile
Second hand New
Technical specifications:
  • Type: Tap & Go, semi-automatic
  • Line: 2.4 mm
  • Line length: 3 m
  • Line profile: four leaf
  • Diameter: 102 mm
  • Housing: low profile
  • Thread: M8 / M10 x 1.25 LH
  • Refilling: from outside
  • Quantity: 1 pc
  • Article: 1914R6-0
Categories: Consumables for tools
Makita 1914R6-0 Trimmer Head Tap & Go, 2.4 mm x 3 m Line, M8/M10 x 1.25 LH, Low Profile
18.85€
Ex Tax: 15.71€
  • Stock: In Stock
  • Brand: Makita
  • SKU:

    1914R6-0

Магазин Младост
2 бр.
Магазин Слатина
2 бр.
Склад
0 бр.
15 days right of return15 days right of return
Preview before paymentPreview before payment
Official distributorOfficial distributor
Secure online paymentSecure online payment

Makita 1914R6-0 Trimmer Head, Tap & Go, 2.4 mm x 3 m Line

1914R6-0 is a semi-automatic nylon line head for Makita's cordless grass trimmers and brushcutters. It works on the Tap & Go system: when the line runs short you tap the spinning head on the ground and a fresh length feeds itself out, without stopping the machine and without taking anything apart. The head holds 3 metres of 2.4 mm line.

Refilled from the outside

According to the manufacturer the head is easy to refill from the outside – the line is threaded through the eyelets and wound on without removing the cover or lifting out the spool. That is the difference between two minutes on your feet in the garden and ten minutes at the bench with a head in pieces and a spring on the floor.

Low profile and four-leaf line

The housing is flat, 102 mm across. The low profile reaches under a bench, under a shrub and under a fence, where a taller head fouls and stops. The line has a four-leaf profile – unlike round line it has edges that cut rather than tear, leaving a cleaner end on the stem.

Thread and compatibility

The mount is M8 / M10 x 1.25 LH – left-hand thread, as on every brushcutter head. Makita lists the head as suitable for the cordless trimmers and brushcutters DUR190L, DUR190U, DUR192L, DUR368A, DUR368L, DUR369A, DUR369L, for the XGT models UR003G, UR006G, UR007G, UR012G, UR013G, UR016G, UR017G, and for UR101C and UR201C.

Applications

Cutting grass around trees, posts, kerbs and fences; finishing off where the mower cannot reach; maintaining lawns and paths. A 2.4 mm line is for grass and weeds – coarse, woody growth calls for a blade, not line.

Technical specifications

Article 1914R6-0
Type Semi-automatic line head (Tap & Go)
Line diameter 2.4 mm
Line length 3 m
Line profile Four Leaf
Head diameter 102 mm
Housing profile Flat (low)
Mount M8 / M10 x 1.25 LH (left-hand thread)
Refilling From the outside, no disassembly
Quantity 1 piece
EAN 0197050357526

Questions and Answers

How does the Tap & Go system work?

With the motor running you tap the head lightly on the ground. Centrifugal force pulls out a fresh length of line and the blade on the guard trims it to length. The machine never stops and nothing is taken apart.

Which machines is this head for?

Makita lists it as suitable for the cordless trimmers and brushcutters DUR190L, DUR190U, DUR192L, DUR368A, DUR368L, DUR369A and DUR369L, for the XGT models UR003G, UR006G, UR007G, UR012G, UR013G, UR016G and UR017G, and for UR101C and UR201C.

Will it fit my petrol brushcutter?

The thread decides, not the brand. The mount is M8 or M10 at 1.25 pitch with a left-hand thread - the brushcutter standard. If your machine has that thread, the head screws on. Check the marking on the shaft before ordering.

What line should I refill it with?

Line of 2.4 mm diameter. Thinner line breaks often; thicker line will not pass the eyelets and loads the motor. The head takes 3 metres.

Why four-leaf line rather than round?

A four-leaf profile has edges that cut the stem instead of tearing it. The cut is cleaner, the grass browns off less at the tip, and line wear is more even.

What does the low-profile housing give me?

The head is flat and 102 mm across, so it reaches under a bench, under a shrub and under a fence, where a taller head fouls and stops the work.

Can I cut brush and young shoots with it?

No. A 2.4 mm line is for grass and weeds. Woody growth needs a cutting blade or disc on the same shaft - check the machine's manual for which blade is approved for it.

Write a review

Note: HTML is not translated!
Rating
Bad Good

The delivery of each order is carried out on the territory of the Republic of Bulgaria with the courier company "ECONT EXPRESS" Ltd. and can be to their office or to an address specified by the client. The products are in their original packaging from the manufacturer. Each order includes the option: Preview and test before payment.

Free shipping

Toolsbox.bg offers its customers free shipping for all orders with total value over 76 € and weight up to 20 kg, excluding oversized products (ladders, scaffolding, generators)., to the Econt office for Bulgaria specified by the client!

Delivery time

The delivery time, to the address or to the office of the courier company, is from 1 to 3 (three) working days from the date on which the order was received and confirmed. If certain circumstances require a delay in the specified delivery times, we will notify you in a timely manner.

Deliveries are made every weekday from 9:00 to 18:00 and until 13:00 on Saturday. No deliveries are made on Sundays or public holidays.

The customer can track their shipment with their waybill number at: https://www.econt.com/services/track-shipment

Delivery cost

For all orders up to €76, over 20 kg or containing an oversized product (ladders, scaffolding, generators), a delivery fee is charged to the courier company. The delivery cost is formed depending on the dimensions and weight of the shipment, as well as your location.

We wish you a pleasant shopping!
The Toolsbox.bg team