Laser levels - Page 2

BOSCH 0601092C00 Laser Level StandDescription: The BOSCH LB 10 & DK 10 laser level stand ensures secure and flexible positioning in various work situations. Thanks to powerful built-in magnets, the level attaches quickly and securely to metal surfaces. The construction is extremely sturdy, and the rubberized base enhances stability and withstands harsh working conditions. Precise height adjustment is easily performed using the clamp, allowing for accurate leveling according to the needs of each application. Technical specifications:Compatible with: GLL 2-15 G, GCL 2-50 G..

Sola Plano 3D Green 3-beam laser levelThe Sola Plano 3D Green cross-line laser level with a working range of 30 to 80 m and a detector features two 360° vertical and one 360° horizontal green laser lines, suitable for precise leveling of water pipes, 90° alignment, marking slopes, leveling floors, walls, or ceilings, and more. The individually switchable lines generate precise 90° laser crosses on the floor, wall, and ceiling. The manual tilt function is ideal for marking or installation in sloped environments. It has an IP54 protection rating and a tripod thread of 1/4" and 5/8". It comes in a carrying case with 2 rechargeable batteries and a charger. Technical specifications:Deviation: ±0.30 mm/m;Self-leveling: ±3°;Operating range without receiver (radius): 30 m;Operating range with receiver (radius): 80 m;Operating temperature: -10°C to +50 °C;Tripod adapter: 1/4" + 5/8";Protection class IP54;Power supply: 2 x 3.6-V Li-ion battery (3450 mAh);Operating time: (at 20°C) 8 hours;Laser class: 2, DIN EN 60825-1 : 2014;Wavelength: 510-530 nm;Dimensions: 150 x 95 x 125 mm;Weight: 3.2 kgIncluded:Rechargeable battery;PLANO 3D GREEN carrying case;Charging station;Charging cable;PLANO 3D GREEN battery adapter;LB GREEN glasses;WH 5/8" Stand...

Sola Plano 4D Green Line Laser LevelDescription: The Sola 71018001 line laser level is a high-precision level with four green laser lines -one horizontal, two vertical 360° lines, and an additional horizontal line at floor level. This configuration ensures exceptional accuracy and flexibility for all types of installation and finishing work. The device offers a range of up to 30 m without a receiver and up to 80 m with a receiver , making it suitable for both indoor work and longer distances. The lines can be turned on and off individually , and their intersection points form precise 90° angles , ideal for installing furniture, wall coverings, or drywall. The additional horizontal line at floor level facilitates the installation of flooring and the leveling of floor elements. Automatic self-leveling compensates for unevenness up to ±3° with an accuracy of ±0.3 mm/m, and a tilt function can be activated if needed-perfect for installing railings or stairs. With a high IP54 protection rating , the device is dust- and moisture-resistant, and the 1/4" and 5/8" threads allow for easy attachment to various types of tripods. The SOLA Plano 4D Green is a professional tool that combines power, precision, and reliability for flawless results on every job. Technical specifications:Laser line color: greenLaser diode: 510-530 nm < 1 mWLaser class: 2Operating range: 30 mOperating range with receiver: 80 mLeveling accuracy: ±3 mm/10 mHorizontal leveling: automaticVertical leveling: automaticHorizontal laser lines: 2Vertical laser lines: 2Self-leveling range: ±3.0°Leveling time: - sPower supply: (2 x 3.6 V 3450 mAh)Battery life: 8 hTripod thread: 1/4", 5/8"Operating temperature: -10 to +50 °CStorage temperature: -20 to +60 °CProtection class: IP54Dimensions (L x W x H): 150 x 95 x 145 mmWeight: 0.720 kgPackage contents:4 x Li-Ion battery 3.6 V 3450 mAh1 x Charger1 x Wall mount1 x Plastic carrying case..

Sola X2 GREEN Cross Line Laser Level, 71014001, Green Beam Sola X2 GREEN (article number 71014001) is a cross line laser level with a green beam, projecting one horizontal and one vertical line at an opening angle of up to 170°. Accuracy is ±0.20 mm/m, working range without a receiver is 30 m radius, and with a handheld receiver it reaches 80 m. The instrument is made by Sola in Austria. Why green rather than red The human eye is most sensitive around 550 nm. A green laser works at 510–530 nm and is perceived several times brighter than a red laser of the same output power. The practical difference shows up exactly where you need it: in a bright room, near a window, on dark or rough surfaces and at longer distances. One important point – the X2 GREEN uses true green diodes rather than a red diode with a frequency converter. Diode lasers light up instantly, work reliably in the cold and do not lose output as they warm up, unlike converter-based designs. Self-levelling within ±3° The instrument levels itself automatically within ±3° – enough to compensate for an uneven floor or a tilted stand without fighting adjustment screws. Beyond that range the pendulum reaches its stop and the laser warns you rather than showing a sloping line as though it were level. That matters: the dangerous failure with a laser level is not inaccuracy but an apparently correct line that is not actually level. Levelling-off mode Self-levelling can be switched off, at which point the tool projects lines at any angle you set. That is what you need when marking out a slope – a ramp, terrace drainage, a stair handrail, a raked ceiling. The two lines switch on and off independently, so you can work with the horizontal alone or the vertical alone, saving battery and removing the distraction of the second line. IP54 protection and site use The housing is rated IP54 – protected against dust and against water splashed from any direction – with rubber protectors along the edges to absorb a fall from a bench or ladder. The operating temperature range is −10 °C to +50 °C, so the tool remains usable through winter in an unheated building. Power comes from 4 AA batteries, which is a genuine practical advantage over a lithium pack: spares are available anywhere, and a level is rarely used intensively enough to justify a rechargeable system. Typical applications A cross line laser is the core tool for interior finishing work: transferring a datum line around a room, installing suspended ceilings and plasterboard partitions, tiling walls and floors, fitting kitchen units, hanging frames and light fittings, and setting doors and windows. A horizontal line with a 170° opening covers nearly an entire wall from one position. What is in the box Article 71014001 is supplied with a protective bag and batteries. That is the difference from the X2 GREEN PROFESSIONAL (71014101), which comes with a hard carrying case and a magnetic wall bracket. The instrument itself is identical in both versions. Technical specifications ManufacturerSola ModelX2 GREEN Article number71014001 TypeCross line laser level Lines1 horizontal + 1 vertical, independently switchable Line opening angleUp to 170° Accuracy±0.20 mm/m Working range without receiver30 m (radius) Working range with receiver80 m (radius) Self-levelling±3°, switchable off for slope work Laser class2 to DIN EN 60825-1:2014 Wavelength510 - 530 nm (true green diodes) Output power< 1.0 mW Power supply4 x 1.5 V AA batteries Protection ratingIP54 Operating temperature-10 °C to +50 °C Dimensions110 x 70 x 100 mm Supplied withProtective bag and batteries Questions and Answers Why does a green laser cost more than a red one? The eye perceives green at 510-530 nm several times brighter than red at the same output power. In a bright room, on a dark surface or at distance, that difference decides whether the line is visible at all without a receiver. Green diodes are also more expensive to make. How does it differ from the X2 GREEN PROFESSIONAL? The instrument is the same. What differs is the package: 71014001 comes with a protective bag and batteries, while 71014101 PROFESSIONAL comes with a hard case and a magnetic wall bracket. What does ±0.20 mm/m accuracy mean in practice? The deviation grows with distance: up to 0.2 mm at 1 m, up to 1 mm at 5 m, up to 2 mm at 10 m. That is more than adequate for interior finishing work; surveying and precision machine installation call for a different class of instrument. Can it project a sloping line? Yes - self-levelling switches off and the tool projects lines at whatever angle you set it to. That is what you need for ramps,..

DeWALT DE0881T-XJ Tripod for Laser Levels, 0.75-1.84 mDescriptionThe DeWALT DE0881T-XJ is a professional aluminum tripod designed for laser levels and other measuring devices equipped with a 1/4" mounting thread. Its adjustable working height from 0.75 to 1.84 m allows accurate positioning for a wide range of indoor and outdoor leveling applications. The lightweight yet durable aluminum construction provides excellent stability, while the telescopic legs with quick-lock clamps enable fast height adjustment. The tripod is ideal for construction, installation, surveying, and finishing work where precise instrument positioning is essential. The DeWALT DE0881T-XJ is a reliable accessory for professionals using laser levels and compatible measuring equipment with a 1/4" thread.Technical Specifications Brand: DeWALT Model: DE0881T-XJ Type: Tripod for laser levels Mounting thread: 1/4" Adjustable height: 0.75-1.84 m Material: Aluminum Telescopic legs: Yes Leg locks: Quick-lock clamps Application: Laser levels and measuring devices with a 1/4" thread Package Includes 1 x DeWALT DE0881T-XJ Tripod..