Your Cart

Hegi Diamond Core Drill and Grinding Bit Set, 9 pieces - 4702

Hegi Diamond Core Drill and Grinding Bit Set, 9 pieces - 4702
Second hand
Technical specifications:
  • Brand: Hegi
  • Article number: 4702
  • Number of pieces: 9
  • Tool types: diamond core bits and grinding burrs
  • Diameter range: Ø6 - Ø68 mm
  • Mounting of the large core bits: M14 female thread
  • Coating: industrial diamond
  • Materials: granite, marble, ceramic, porcelain, concrete
  • Packaging: aluminium case with die-cut foam insert
  • Intended for: professional fitters, tradespeople and enthusiasts
Hegi Diamond Core Drill and Grinding Bit Set, 9 pieces - 4702
111.97€
Ex Tax: 93.31€
  • Stock: In Stock
  • SKU:

    4702

Магазин Младост
1 бр.
Магазин Слатина
1 бр.
Склад
0 бр.

Buy with

13 x €9.96

15 days right of return15 days right of return
Preview before paymentPreview before payment
Official distributorOfficial distributor
Secure online paymentSecure online payment

Hegi Diamond Core Drill and Grinding Bit Set, 9 pieces (article 4702)

The Hegi 4702 set packs nine diamond tools into one aluminium case: core bits for cutting holes in hard mineral materials, plus shaped burrs for opening up and finishing the hole once it is through. Diameters run from Ø6 mm to Ø68 mm, and both of those figures are stamped on the tools themselves rather than taken from a catalogue sheet. Every piece carries a high-grade industrial diamond coating and is intended for granite, marble, ceramic, porcelain and concrete. It suits professional fitters and tradespeople, and equally a well-equipped home workshop.

Core bits for cutting holes

Most of the set consists of diamond core bits in several diameters, from the large sizes used for a tap, a waste outlet or a socket cut-out in tile and porcelain stoneware, down to the small ones for anchors and fixing screws. Diamond grit is bonded around the full circumference of the cutting edge, and the barrel is pierced so slurry can clear. The largest bit in the case is stamped Ø68 MM. The intermediate diameters are visible in the photographs but the distributor does not publish them individually, so they are quoted here as a range rather than as a list.

Burrs for shaping and finishing

Alongside the core bits the case holds diamond burrs for finishing work: a ball for smoothing and slightly enlarging a hole, a cone for chamfering and countersinking the rim, and small drum-shaped burrs for fine grinding and truing the outline. These are what set article 4702 apart from a plain drilling-only kit: the hole can be taken through to a clean, ready-to-fit edge without changing over to another machine. The smallest burr is stamped Ø6 MM.

Mounting and use

The large core bits carry an M14 female thread, the standard fitting on angle grinders and on diamond drilling machines. The original product photographs also show a hex-shank M14 adapter assembled into the largest core bit, which allows the set to be run from an ordinary drill. The distributor publishes no itemised breakdown of the kit, so we recommend confirming that the adapter is supplied when you place the order.

Applications

The set covers the everyday work of sanitary and tiling installation: holes for taps, shower columns, waste traps and pipe runs through tile and porcelain stoneware, socket and switch cut-outs in stone cladding, drilling into marble and porcelain worktops, and small anchor holes in concrete. The grinding burrs finish the job wherever the rim of the hole will be on show, around grout lines, or where the surface has to be prepared for bonding.

Technical specifications

Brand Hegi
Article number 4702
Number of pieces 9
Tool types diamond core bits and shaping/grinding burrs
Diameter range Ø6 - Ø68 mm
Mounting of the large core bits M14 female thread
Coating high-grade industrial diamond
Materials granite, marble, ceramic, porcelain, concrete
Packaging aluminium case with die-cut foam insert
Intended for professional fitters, tradespeople and enthusiasts

What is in the box

  • Diamond core bits in several diameters - the largest stamped Ø68 MM
  • Diamond ball burr for smoothing and enlarging holes
  • Diamond cone burr for chamfering and countersinking the rim
  • Drum-shaped diamond burrs for fine grinding - the smallest stamped Ø6 MM
  • Aluminium case with a die-cut foam insert giving every tool its own pocket
  • 9 pieces in total; the distributor publishes no breakdown by individual diameter

Questions and Answers

What diameter range does the set cover?

The set spans Ø6 mm to Ø68 mm. Both end sizes are stamped on the tools themselves: the largest core bit reads Ø68 MM and the smallest burr reads Ø6 MM. The intermediate diameters are not published by the distributor, so if you need one specific size please confirm it before ordering.

What machine do these core bits run on?

The large core bits have an M14 female thread, the fitting used by angle grinders and by diamond drilling machines. The product photographs also show a hex-shank M14 adapter assembled into the largest bit, which lets you run the set from an ordinary drill. As the distributor gives no itemised list, it is worth confirming that the adapter is included when you order.

Which materials is the set made for?

The distributor lists granite, marble, ceramic, porcelain and concrete. In practice that covers wall and floor tile, porcelain stoneware, stone cladding and porcelain worktops. The set is not intended for wood or metal, where bi-metal or carbide hole saws are the right tool.

What are the burrs for?

The ball, cone and drum burrs are for finishing after the hole is cut. The ball smooths and slightly enlarges the bore, the cone chamfers or countersinks the rim, and the drums true up the outline and grind it fine. That takes the hole to a finish suitable for visible installation without swapping machines.

Does it come with a case?

Yes. The set is supplied in an aluminium case with a die-cut foam insert that gives each tool its own pocket. This is visible in every photograph of the article: the case has an aluminium edge, corner protectors and foam padding in the lid as well.

How many core bits and how many burrs are there?

The declared count is 9 pieces in total, which matches the number of filled pockets in the case. The photographs clearly show core bits in several diameters, a diamond ball, a cone and small drum burrs. The exact split by type and diameter is not published by the distributor, so we do not state it as a specification.

How does it differ from the 9-piece drilling-only set?

Hegi also offers a 9-piece set made up purely of core bits for wet and dry drilling. Article 4702 is the other option: along with the core bits it includes shaping and grinding burrs, namely a ball, a cone and drum burrs. If you only need to drill, the other set is enough; if the holes also have to be finished, choose 4702.

Write a review

Note: HTML is not translated!
Rating
Bad Good

The delivery of each order is carried out on the territory of the Republic of Bulgaria with the courier company "ECONT EXPRESS" Ltd. and can be to their office or to an address specified by the client. The products are in their original packaging from the manufacturer. Each order includes the option: Preview and test before payment.

Free shipping

Toolsbox.bg offers its customers free shipping for all orders with total value over 76 € and weight up to 20 kg, excluding oversized products (ladders, scaffolding, generators)., to the Econt office for Bulgaria specified by the client!

Delivery time

The delivery time, to the address or to the office of the courier company, is from 1 to 3 (three) working days from the date on which the order was received and confirmed. If certain circumstances require a delay in the specified delivery times, we will notify you in a timely manner.

Deliveries are made every weekday from 9:00 to 18:00 and until 13:00 on Saturday. No deliveries are made on Sundays or public holidays.

The customer can track their shipment with their waybill number at: https://www.econt.com/services/track-shipment

Delivery cost

For all orders up to €76, over 20 kg or containing an oversized product (ladders, scaffolding, generators), a delivery fee is charged to the courier company. The delivery cost is formed depending on the dimensions and weight of the shipment, as well as your location.

We wish you a pleasant shopping!
The Toolsbox.bg team