Hand tools - Page 66

DeWALT DCF403D2GT Cordless StaplerDescription: The DeWALT DCF403D2GT cordless riveter features a brushless motor powered by an 18 V battery. It is compatible with rivets ranging from 2.4 to 4.8 mm in diameter and delivers a force of 10 kN. The tool features a ball screw, which provides a durable and highly efficient drive mechanism with consistent performance. The planetary gear and motor are located in the handle, which ensures the tool's center of gravity and provides perfect balance and high ergonomics during prolonged use. The head cone can be cleaned and maintained without the need for tools. Cuttings are collected in an easily removable container. LED lighting is provided for excellent visibility at the work site. Technical specifications:Battery voltage: 18 VBattery type: Li-ionRivet sizes: 2.4, 3.2, 4, and 4.8 mmNumber of rivets processed per minute: 43Stroke length: 25 mmPulling force: 10 kNWeight: 1.6 kgIncluded:2 x batteries1 x charger1 x storage casehttps://youtu.be/Fnp0fbs1RKM?si=QYzs05vzWguwSZtd..

DeWALT DCF403E1GT Cordless StaplerDescription: The DeWALT DCF403E1GT cordless riveter features a brushless motor powered by an 18 V battery. It is compatible with rivets ranging from 2.4 to 4.8 mm in diameter and delivers a force of 10 kN. The tool features a ball screw, which provides a durable and highly efficient drive mechanism with consistent performance. The planetary gear and motor are located in the handle, which ensures the tool's center of gravity and provides perfect balance and high ergonomics during prolonged use. The head cone can be cleaned and maintained without the need for tools. Cuttings are collected in an easily removable container. LED lighting is provided for excellent visibility at the work site. Technical specifications:Battery voltage: 18 VBattery type: Li-ionRivet sizes: 2.4, 3.2, 4, and 4.8 mmNumber of rivets processed per minute: 43Stroke length: 25 mmPulling force: 10 kNWeight: 1.6 kgIncluded:1 x PowerStack battery1 x charger1 x storage casehttps://youtu.be/Fnp0fbs1RKM?si=QYzs05vzWguwSZtd..

DeWALT DCF403NT Cordless StaplerDescription: The DeWALT DCF403NT cordless riveter features a brushless motor powered by an 18 V battery. It is compatible with rivets ranging from 2.4 to 4.8 mm in diameter and delivering a force of 10 kN. The tool features a ball screw, which ensures a durable and highly efficient drive mechanism with consistent performance. The planetary gear and motor are located in the handle, which ensures the tool's center of gravity and provides perfect balance and high ergonomics during prolonged use. The head cone can be cleaned and maintained without the need for tools. Cuttings are collected in an easily removable container. LED lighting is provided for excellent visibility at the work site. Ships without battery and charger! Technical specifications:Battery voltage: 18 VBattery type: Li-ionRivet sizes: 2.4, 3.2, 4, and 4.8 mmStaples processed per minute: 43Stroke length: 25 mmPulling force: 10 kNWeight: 1.6 kgIncluded:1 x Carrying case https://youtu.be/Fnp0fbs1RKM?si=QYzs05vzWguwSZtd..

DeWALT DCF414E2GT Cordless RiveterDescription: The DeWALT DCF414E2GT cordless riveter is the ideal solution for fastening rivets in various materials. Equipped with a brushless motor, this riveter delivers an impressive pulling force of up to 4,500 lbf, allowing for easy riveting, including stainless steel rivets. It can drive up to 300 rivets on a single charge, ensuring a long period of productive work. The tool-free nose piece replacement system and the integrated bit storage compartment make working with the riveter much more convenient and efficient. In addition, the bright LED lighting ensures good visibility in low-light areas. Designed to work with rivets ranging from 4.8 mm to 6.4 mm in size, it is suitable for a wide range of applications. Technical specifications:Battery voltage: 18 VBattery type: Li-ionBattery capacity: 1.7 AhRivet sizes: 4.8 mm, 6 mm, and 6.4 mmNumber of rivets processed per minute: 38Stroke length: 30 mmPulling force: 20 kNWeight: 1.6 kgIncluded:2 x PowerStack 18 V, 2 Ah rechargeable battery1 x Charger1 x Carrying case https://youtu.be/Fnp0fbs1RKM?si=k11DSIqP0CfAI7F_..

DeWALT DCF414NT Cordless StaplerDescription: The DeWALT DCF414NT Cordless Riveter is the ideal solution for fastening rivets in various materials. Equipped with a brushless motor, this riveter delivers an impressive pulling force of up to 4,500 lbf, allowing for easy fastening of rivets, including stainless steel ones. It can drive up to 300 rivets on a single charge, ensuring a long period of productive work. The tool-free nose piece replacement system and the integrated bit storage compartment make working with the riveter much more convenient and efficient. In addition, the bright LED lighting ensures good visibility in dimly lit areas. Designed to work with rivets ranging from 4.8 mm to 6.4 mm in size, it is suitable for a wide range of applications. Ships without a battery or charger! Technical specifications:Battery voltage: 18 VBattery type: Li-ionRivet sizes: 4.8 mm, 6 mm, and 6.4 mmStaples per minute: 38Stroke length: 30 mmPulling force: 20 kNWeight: 1.6 kgIncluded:1 x Carrying case https://youtu.be/Fnp0fbs1RKM?si=k11DSIqP0CfAI7F_..

Sealey SDL11 Cordless Soldering Iron SetDescription: The Sealey SDL11 Cordless Soldering Iron Kit is part of the extensive Premier line of hand tools designed for daily professional use. This cordless and lightweight soldering iron is extremely comfortable to use, providing maximum mobility and freedom of movement. The Sealey SDL11 features a built-in LED that illuminates the soldering area, making it ideal for use in low-light areas, such as engine compartments. The kit includes a variety of tips: standard, chisel, and heat-shrink, as well as a cleaning sponge, solder, a stand, and a USB charging cable. The soldering iron heats up to a maximum temperature of 600°C and provides up to 40 minutes of continuous operation on a single charge. It is powered by a 2.4Ah lithium-ion battery, which fully charges in 3.5 hours. With the Sealey SDL11 cordless soldering iron kit, you get everything you need for professional and convenient soldering, while taking advantage of the high mobility and functionality of the cordless device. Technical specifications:Power: 30WBattery capacity: 2.4Ah Battery type: Li-ionRun time: 40 minCharging time: 3.5 hoursMaximum temperature: 600°CWeight: 0.520 kg..

DeWALT DCE590D1 Cordless VacuumDescription: The DeWALT DCE590D1 cordless suction cup is a versatile tool with a maximum load capacity of up to 120 kg , suitable for working with various building materials such as tiles, stone, glass, wood, concrete, and drywall. It is equipped with automatic vacuum control , which alerts the user in the event of a pressure drop, ensuring safety and efficiency during operation. On a single battery charge, the tool can operate for up to 4 days , making it exceptionally reliable for extended use. The ergonomic and lightweight design ensures comfort and minimal strain even during intensive use. The DeWALT Grabo Lifter DCE590N is ideal for professionals seeking a combination of power, precision, and comfort. Technical Specifications:Voltage: 18 VBattery type: Li-ionBattery capacity: 2 AhMaximum load capacity: 120 kgVacuum control: Automatic with digital sensorOperating time on a single charge: up to 4 days (depending on the battery)Package contents:1 x DCB183 rechargeable battery, 2 Ah1 x Charger1 x Sealing ring (pre-assembled)1 x Replacement filter1 x LCD screen coverhttps://youtu.be/J8uds_uKE-k?si=GhnaTRqWjQhmRczr..

The Montolit Battile cordless suction cup is suitable for ceramic tiles, porcelain tiles, marble, granite, and glass. The suction cup is compact and lightweight, powered by an 8.4V Li-Ion battery The tool works by using vibrations to remove air bubbles from the adhesive after the tiles have been laid, ensuring a perfect bond and eliminating air pockets that could cause breakage. The vibration frequency is adjustable from 5,000 to 18,000 vibrations per minute using a control located next to the handle. The suction power is sufficient to lift small or medium-sized tiles and to straighten and reposition large slabs. It features an additional handle for a secure grip and a battery level indicator. To conserve battery life, the suction cup automatically shuts off after 1 minute of inactivity. It comes with a built-in battery, charger, and carrying case. Specifications: - Motor power: 75W - Vibration frequency: 5000 - 18000 rpm - Battery: Li-Ion - Battery voltage: 8.4V - Battery capacity: 2.5Ah - Charging current: 1.5 A - Charging time: 2 hours - Suction cup diameter: 120 mm - Dimensions (HxW): 153 x 250 mm - Weight: 0.95 kg - Manufacturer: Brevetti Montolit S.p.A - Italy..

Milwaukee M12 ONEFTR12-201C Cordless Torque WrenchDescription: The Milwaukee M12 ONEFTR12-201C cordless torque wrench delivers up to 50% faster installation compared to hand tools. This allows the user to complete tasks more efficiently and with less effort. With a powerful brushless POWERSTATETM motor, REDLITHIUMTM battery, and REDLINK PLUSTM electronic intelligence, it delivers exceptional power, runtime, and durability. It offers a torque range from 16.9 Nm to 203.4 Nm with an accuracy of ±2% . This ensures reliable tightening of fasteners with critical torque and prevents over- or under-tightening. With ONE-KEYTM technology, the user can record torque, providing torque data and adaptive reports for inspectors or owners, which improves job tracking and documentation. It features an adjustable torque output that allows control of the tool's output torque through the motor. With four torque measurement modes: ft-lb, in-lb, Nm, and kg-cm . The tool is available in six languages, including English, Spanish, and French. Four notification modes indicate when the tool reaches, meets, or exceeds the target torque (audible, LED, LCD, and vibration). Tightening is easy in two steps: Pull the trigger until the tool stops just before the target torque value, then finish by hand to reach the target torque.Technical specifications:Voltage: 12 VBattery type: Li-ionAccuracy: CW ±2%, CCW ±3%Max. torque: 203.4NmTorque range: 16.9 - 203.4 NmNo-load speed: 0 - 100 rpmChuck: 1/2" squareSound power level: 93.84 dBALength: 596.9 mmWeight (EPTA): 2.6 kgIncluded:1 x C12 C charger1 xM12 B2 battery1 x Kitboxhttps://youtu.be/jatr0lfUI9A..

Sealey CP20VAP Cordless Tire InflatorDescription: The Sealey CP20VAP Cordless Tire Pump is part of the SV20 series, designed for professionals, providing them with heavy-duty, high-performance, and durable tools featuring a lightweight composite design for superior control and comfort during use. This hand-held tire pump features a dual-injection composite body and rubber grips, which not only provide added comfort but also reduce vibration during use. The pump offers two pressure settings-psi or bar-making it convenient and easy to use in various situations. The automatic shut-off when the preset pressure is reached and the digital LED display provide a clear view of the current pressure. Comes without a battery or charger!Technical specifications:Voltage: 20VBattery type: Li-ionMeasurement scale: psi/barMaximum air pressure: 7 bar/100 psiTypical inflation time: 0-30 psi in 205 seconds (175/70R)Weight: 0.75 kgIncluded:1 x 500 mm air hose1 x Spherical needle2 x Bicycle tire valves3 x Universal adapters..

Knipex 97 22 240 Combination Crimping PliersDescription: Knipex 97 22 240 crimping pliers are high-quality tools designed for a wide range of cable applications. They are made of a special high-strength steel grade, ensuring durability and reliability during intensive use. The bolted joint ensures stability and smooth movement, which is essential for precise work. These pliers are comfortable to use thanks to the two-component insulation on the handles, which provides a good grip and comfort during use. The working part of the pliers features slots for cutting copper and brass screws of various sizes, such as M2.6, M3, M3.5, M4, and M5. With a length of 240 mm, these crimping pliers provide sufficient maneuverability and control for various cable tasks. Technical specifications:Length: 240 mmAWG: 20-10Wire cross-section: 0.5-6 mm2Material: steelInsulation type: multi-component coatingVDE tested at 1000V: noWeight: 0.3 kg..

Knipex 97 78 180 Crimping ToolDescription: The Knipex 97 78 180 crimping pliers are designed with a length of 180 mm and a working range of 0.25 to 16 mm2. They are specifically designed for crimping wires of various sizes and terminal types. The tool features 9 extra-deep dies with tapered side surfaces that ensure stable crimping of the connections. This guarantees reliability and durability, ensuring good contact and preventing the terminals from falling out. The pliers' handles are insulated and multi-component, and are VDE-tested for safety. Their ergonomic design ensures a comfortable grip and reduces fatigue during prolonged use. Technical specifications:Working range: 0.25 - 16 mm2Dimensions: 180 x 54 x 28 mmMaterial: tool steelWeight: 0.254 kg..

Knipex 98 62 02 Flat-Nose PliersDescription: Knipex 98 62 02 flat-nose pliers, 220 mm long, are a professional insulated tool for safe work on electrical installations. The special insulation provides protection when working with live parts up to 1000V AC and 1500V DC, making them indispensable for electricians. The materials are resistant to chemically aggressive substances, allowing use in industrial environments where acids, bases, or solvents are present. The full insulation of the pliers significantly reduces the risk of a short circuit in case of accidental contact with wires. The housing is made of durable plastic reinforced with glass fibers for maximum durability. The handles feature special soft-grip zones that ensure a secure and comfortable grip even during prolonged use or in wet conditions. Technical specifications:Length: 220 mmMaterial: plasticHandles: two-componentType: pliersJaws: flatFeatures: straight, insulated 1000VDIN Standard: EN 60900Weight: 0.130 kg..

BOSCH Professional 2608522068 Extra Hard Phillips Screwdriver Bit, PH2 x 145 mm The BOSCH 2608522068 Extra Hard screwdriver bit is a great choice for general-purpose use. All tasks are achievable thanks to S2 modified steel and an optimized heat treatment process, resulting in exceptional hardness that ensures sufficient performance for any task. The conical torsion zone of the bit easily handles maximum torques, as it absorbs force and vibrations during tightening, thus performing all tasks effectively. It features a 1/4-inch hex shank and is designed for universal use with screwdrivers and cordless drills. Technical specifications:Brand: BOSCH;Material: S2 steel;Profile: PH2;Length: 145 mm;Socket: 1/4" (hex);Application: cordless drills, screwdrivers, and impact drivers;Quantity per package: 1 pc.;Dimensions (LxWxH): 222 x 50 x 7 mm;Weight: 0.030 kg...

Durable Stanley STA61020 bits are manufactured with the precision and accuracy required for a perfect fit on the screw head. Stanley offers both universal bits for general use and professional bits made from the highest-quality, highly durable materials. Type of slot/bit/screwdriver: Phillips Length, mm: 25 mm Pack size (pcs.): 2 pcs...

DeWALT DWHT0-70275 PliersDescription: The DeWALT DWHT0-70275 wire cutters feature an innovative design with a large lever-long handles for maximum cutting power. Cuts wire, bolts, screws, and nails. Made of induction-hardened steel for superior durability and excellent rust protection. The ergonomic and durable folding handles, made from two materials, add comfort and last longer. The DWHT0-70275 features a spring-loaded design for easy use. It has a locking mechanism for easy storage. Technical Specifications:Brand: DeWALTModel: DWHT0-70275Material: Induction-hardened steel Application: wire, bolts, screws, and nailsLength: 190 mm..

Knipex 14 26 160 Side-Cutting PliersDescription: Knipex 14 26 160 cutting pliers combine high-precision cutting with convenient insulation stripping. With extended cutting edges and an improved gear ratio, the tool provides up to 25% greater working capacity. They are equipped with precision slots for stripping single-core (solid) cables with cross-sections of 1.5 and 2.5 mm2, as well as the ability to comfortably cut cables up to 5 x 2.5 mm2. The long tips allow for precise cutting even in confined spaces. The cutting edges are induction-hardened to a hardness of approximately 60 HRC and effortlessly handle soft conductors up to Ø 4.0 mm. They are made of forged vanadium electric steel, repeatedly oil-hardened for maximum strength and durability. The chrome-plated finish contributes to corrosion resistance and extends the tool's service life. Technical specifications:Length: 160 mmCutting capacity for medium-hard wire: 1.5 mmCutting capacity for soft wire: 2.5 mmHandles: two-componentType: wire cuttersApplication: for cutting, strippingSpecification: insulated 1000VHardness: 60 HRcStandard: DIN EN 60900 IEC 60900Dimensions (L x W x H): 160 x 60 x 30 mmWeight: 0.238 kg..

Knipex 68 01 280 Reinforcing Bar CuttersDescription: The Knipex 68 01 280 diagonal wire cutters feature a length of 280 mm and a cutting capacity of up to 4.5 mm. They are specially designed for cutting both soft and hard wires and are also suitable for twisting and cutting binding wire. The cutting edges of the pliers are additionally induction-hardened, ensuring their strength and durability. They have a hardness of approximately 61 HRC, which ensures sharp and precise cutting of various types of wire. The pliers are made of high-quality special tool steel, which is forged and oil-hardened. This guarantees their durability and reliability during intensive use, as well as comfort during operation. With their functionality and high-quality materials, Knipex's wire cutters are an indispensable tool for professional and DIY tasks that require precision and reliability when cutting various types of wire. Technical specifications:Material: CrV steelInsulation type: plastic coatingVDE tested at 1000V: noJaw shape: pointedRockwell hardness: 61 HRCCutting capacity for soft wire: 4.5 mmCutting capacity for medium-hard wire: 4 mmHard wire cutting capacity: 3.2 mmJaw coating: polishedManufacturing method: induction hardened, forged, temperedStandard: DIN ISO 5748Length: 280 mm..

Knipex 6801200SB Wire CuttersDescription:Knipex 6801200SB wire cutters are designed for optimal movement when tightening joints during rebar work. They are ideal for cutting soft and hard wires, as well as for twisting and cutting binding wire. The cutting edges are additionally hardened to a hardness of 61 HRC, ensuring long-lasting durability and efficiency during use. They are made of high-quality special tool steel, forged and oil-hardened for added strength and durability. These pliers are perfect for professional and heavy-duty applications in construction and industry.Technical specifications:Length: 200 mmFinish: phosphated, blackHead type: polishedHandle material: non-slip plasticCutting capacity for soft wire: 4 mmCutting capacity for medium-hard wire: 3.5 mmHard wire cutting capacity: 2.8 mm..