Cordless screwdrivers - Page 36

Makita DHP453ZK Cordless Impact DriverDescription: The Makita DHP453ZK Impact Driver is the ideal solution for professional and home applications, especially for medium-duty tasks. Equipped with two functions-screwdriving and drilling-this impact driver offers flexibility and convenience for a variety of jobs. With variable electronic speed control, the drill driver enables optimal screwdriving, ensuring controlled and precise task execution. The hardened steel gear drive ensures durability and reliability even during intensive use. With two speeds-0-400/1,300 rpm-the screwdriver can adapt to different speed requirements depending on the application. The maximum torque of 42 Nm provides sufficient power for heavier tasks. The chuck range is from 1.5 to 13 mm, allowing for the use of a variety of bit types. Additionally, thanks to the reverse function, the impact driver is also suitable for dismantling equipment, making it a versatile tool for use in various situations. "Deals 2012" Ltd. offers not just the Makita DHP453ZK Impact Driver , but your reliable source for innovative solutions. With us, you get not only high-quality products but also expert assistance in making your selection. Our goal is to make your work easier, faster, and more efficient. Ships without battery and charger! Technical specifications:Voltage: 18 VBattery type: Li-IonSpeed settings: 2No-load speed, 1st speed: 0 - 400 min-1No-load speed, 2nd speed: 0 - 1300 rpmQuick-release chuck: 1.5 - 13 mmMaximum drilling diameter in steel: 13 mmMaximum drilling diameter in wood: 36 mmMaximum drilling diameter in concrete: 13 mmBlows per minute at 1st speed: 0 - 6000 min-1Strokes per minute at speed II: 0-19,500 min-1Torque settings: 21Maximum torque (hard): 42 NmMaximum torque (soft): - NmLighting: noNoise: 83 dBDimensions (L x W x H): 239 x 79 x 227 mmWeight: 1.4 kgIncluded: 1 x Carrying case https://youtu.be/u_3n6co_UFM?si=DEndIL2edqQe4PLZ..

The compact Makita DHP482 in white (the white color indicates an anniversary model; these are produced once every five years; in terms of specifications, it is identical to the green models) with a maximum torque of 62 Nm. A lightweight and compact tool with variable speed control (2 settings). Keyless chuck. The all-metal transmission and its dust-proof housing ensure the tool's high durability. Comes without a battery or charger!Chuck Type: 3-jaw Screw Capacity: Wood (mm): 10 x 90 Drill Capacity: Concrete (mm): 13 Drill Capacity: Metal (mm): 13 Drill Capacity: Wood (mm): 38 Impact Rate (BPM) High: 0-28,500 Impact Rate (BPM) Med: N/A Impact Rate (BPM) Low: 0-9,000 Overall Length (mm): 198 Weight (approx. kg) with 1.5/2Ah battery: 1.5 Weight (approx. kg) with 3/4/5Ah battery: 1.8 Brushless motor: No Torque: 60 Nm Warranty: 3 years after registration on the Makita website..

Makita DHP489Z Impact DriverDescription: The Makita DHP489Z brushless impact driver offers exceptional convenience and functionality. With a compact design and an overall length of 175 mm, it provides better control during operation. The tool offers multiple drilling modes, including screwdriving mode, drilling mode, and hammer drilling mode. The high-brightness LED light illuminates the work area, improving visibility during operation. The two-speed mechanical gearbox allows for high speeds for fast drilling and high torque for working with heavy loads. The brushless motor and all-metal gears ensure reliability and durability. Extreme Protection Technology (XPT) protects the tool from dust and moisture, increasing its durability. Ships without a battery or charger! Technical specifications:Voltage: 18 V;Battery type: Li-Ion;Motor type: Brushless;Chuck: 1.5 - 13 mm;Speeds: 2;No-load speed, 1st speed: 0 - 550 rpm;No-load speed, 2nd speed: 0-1,800 rpm;Impacts per minute / low: 0-8,250 min-1Blows per minute / high: 0-27,000 min-1Maximum drilling diameter in steel: 13 mm;Maximum drilling diameter in concrete: 16 mm;Maximum drilling diameter in wood: 38 mm;Maximum torque / hard: 73 Nm;Maximum torque/soft: 40 Nm; Torque settings: 20 + D; LED light: Yes;Noise level: 92 dB;Weight: 1.5 kgIncluded:1 x Belt cliphttps://youtube.com/shorts/9M7kK_R8Uaw?si=x3DoSR8g3S0SkYUA ..

DeWALT DCF787NT Cordless Impact DriverDescription: The DeWALT DCF787NT Cordless Impact Driver is a powerful and compact tool designed for efficient work in tight spaces. Powered by an 18V XR lithium-ion battery, this model is equipped with a brushless motor that ensures high performance and a long tool life. A maximum torque of 170 Nm and a speed of up to 2,800 rpm allow for easy handling of various screwing and assembly tasks. With a compact body length of 137 mm and a lightweight design of 0.9 kg, the DCF787N is ideal for working in confined spaces. The keyless hex chuck facilitates quick bit changes, and the ergonomic handle ensures comfort and excellent control during operation, making this tool an excellent choice for professionals and DIY enthusiasts. Ships without a battery or charger!Technical specifications:Voltage: 18 VMaximum torque: 170 NmImpact rate: 0-2800 min-1Standard bolt capacity: M4-M10No-load speed: 0-3200 rpmChuck: 1/4" HexLength: 137 mmWeight: 0.9 kgIncluded: 1 x Carrying case https://youtu.be/HB6wGJoOhaY?si=uDBv0fM4pC7VTUYT..

The DEWALT DCF894N air-cooled motor delivers impressive power for impact applications.Equipped with the new XR Li-Ion battery for maximum runtime. XR ergonomic rubberized grip and switch position for comfort and control. Brushless motor. BATTERIES AND CHARGER NOT INCLUDED!!!Manufacturer: DeWALT Warranty: 3 years. Battery voltage: 18 V. Battery capacity /Ah/: 4/5 Ah Soft start: yes Chuck: 1/2" square No-load speed*: 0-2000 rpm Number of speeds: 2 Weight: 2.20 kg (with 5 Ah battery) Battery type: Li-Ion Torque: 450.00 Nm Model: DCF894N..

Manufacturer : Milwaukee Model: M18 BLPP2B2-502X Warranty: 3 years after registration on the website Description: Tool 1 M18 BLDD2 Tool 2 M18 BLID2 2 x 5Ah Battery - M18 B5 Fast Charger - M12-18FC Battery Capacity (Ah) 5.0 Battery Type Li-ion Charger Included 59 minutes Number of Batteries Included 2 Voltage (V) 18 M18 BLDD2 - Brushless Impact Driver: The new brushless motor design delivers 40% more torque than the previous model-up to 82 Nm. The compact design (180 mm long) provides excellent balance and control, ideal for overhead applications or working in tight spaces. Advanced 13 mm heavy-duty metal chuck for quick bit changes and superior bit retention. Optimized speed for faster drilling and fastening (0-550/0-1,800 rpm). On-board fuel gauge and LED light. All-metal reversible belt clip to hang your tool quickly and easily. REDLINKTM electronics for overload protection in the tool and battery ensure the best quality in the system. REDLITHIUMTM-ION battery pack features superior pack design, electronics, and no-drift performance to provide more runtime and more work over the life of the pack. Flexible battery system: works with all MILWAUKEE® M18TM batteries. M18 BLID2 - Brushless 1/4'' Hex Impact Wrench: The brushless motor is only 130 mm long, making it ideal for working in tight spaces. Brushless motor technology delivers 180 Nm of torque, 3,400 rpm, and 4,200 rpm. 3-mode MOTOR CONTROL allows the user to switch between three different speed and torque settings for maximum application flexibility. One-hand chuck with a locking mechanism for faster and easier bit changes. Heavy-duty metal gearbox and high-power gears for superior durability and maximum torque. On-board fuel gauge and LED light. REDLINKTM electronics provide overload protection for both the tool and the battery, ensuring top-tier system performance. REDLITHIUMTM-ION battery pack features superior pack construction, electronics, and no-drift performance to ensure more run time and more work over the life of the pack. All-metal reversible belt clip to hang your tool quickly and easily. Flexible battery system: works with all MILWAUKEE® M18TM batteries. M12TM - M18TM FAST CHARGER M12-18 FC : Charges all M18TM, M14TM, and M12TM REDLITHIUMTM-ION batteries. Charges sequentially-first, first charge-which results in less time needed to manage charging cycles. M12TM REDLITHIUMTM-ION 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah batteries recharge in 28 min / 45 min / 57 min / 90 min or less. M18TM REDLITHIUMTM-ION 2.0 Ah / 4.0 Ah / 5.0 Ah / 6.0 Ah / 9.0 Ah batteries recharge in 26 min / 47 min / 59 min / 68 min / 95 min or less. M18TM 5.0 Ah Battery - M18 B5 : 2.5 times more runtime, up to 20% more power, and up to 2 times longer battery life compared to other lithium-ion technologies and/or previous MILWAUKEE® battery technology. REDLITHIUMTM-ION protection with REDLINKTM digital protection from previous models to ensure your investment in cordless power tools is protected against misuse. Individual cell monitoring allows for optimal charging and discharging for maximum lifespan. A durable metal-frame battery construction with impact-resistant separators protects against failure due to excessive vibration or drops. Water-resistant pathways lead away from the electronics and out of the battery. It can withstand extreme temperatures down to -20 °C without compromising performance or battery life...

Manufacturer : Milwaukee Model: M18 BLPP2A2-502X Warranty: 3 years after registration on the website Description: Tool 1 M18 BLPD2 Tool 2 M18 BLID2 2 x 5Ah Battery - M18 B5 Fast Charger - M12-18FC Battery Capacity (Ah) 5.0 Battery Type Li-ion Charging Time 59 minutes Number of batteries included 2 Voltage (V) 18 M18 BLPD2 - Brushless Impact Driver: The new brushless motor design delivers 40% more torque than the previous model-up to 82 Nm. The compact design (180 mm long) provides excellent balance and control, ideal for overhead applications or working in tight spaces. An advanced 13 mm heavy-duty metal chuck for quick bit changes and superior bit retention. REDLINKTM electronics provide overload protection for both the tool and the battery, ensuring the highest quality in the system. The REDLITHIUMTM-ION battery pack features superior pack construction, electronics, and fade-free performance to deliver more runtime and more work over the life of the pack. Optimized speed for faster drilling and fastening (0-550/0-1800 rpm). On-board fuel gauge and LED light. All-metal reversible belt clip to hang your tool quickly and easily. Flexible battery system: works with all MILWAUKEE® M18TM batteries. M18 BLID2 - Brushless 1/4'' Hex Impact Driver: The brushless motor is only 130 mm long, making it ideal for working in tight spaces. Brushless motor technology delivers 180 Nm of torque, 3,400 rpm, and 4,200 rpm. 3-MODE MOTOR CONTROL allows the user to switch between three different speed and torque settings for maximum application flexibility. One-handed bit holder with lock-on for faster and easier bit changes. Heavy-duty metal gearbox and high-power gears for superior durability and maximum torque. On-board fuel gauge and LED light. REDLINKTM overload protection electronics in the tool and battery ensure the best quality in the system. REDLITHIUMTM-ION battery pack features superior pack construction, electronics, and no-drift performance to provide more runtime and more work over the life of the pack. All-metal reversible belt clips to clip your tool on quickly and easily. Flexible battery system: works with all MILWAUKEE® M18TM batteries. M12TM - M18TM FAST CHARGER M12-18 FC: Recharges all M18TM, M14TM, and M12TM REDLITHIUMTM-ION batteries. Recharges sequentially-first, first charge-resulting in less time needed to manage charging cycles. M12TM REDLITHIUMTM-ION 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah batteries recharge in 28 min / 45 min / 57 min / 90 min or less. M18TM REDLITHIUMTM-ION 2.0 Ah / 4.0 Ah / 5.0 Ah / 6.0 Ah / 9.0 Ah batteries recharge in 26 min / 47 min / 59 min / 68 min / 95 min or less. M18TM 5.0 Ah Battery - M18 B5: 2.5 times more runtime, up to 20% more power, and up to 2 times longer battery life compared to other lithium-ion technologies and/or previous MILWAUKEE® battery technology. REDLITHIUMTM-ION protection with REDLINKTM digital protection from previous models to ensure your cordless power tool investment is protected against misuse. Individual cell monitoring allows for optimal charging and discharging for maximum life. A durable metal-frame battery construction with impact-resistant separators protects the pack from failure due to excessive vibration or drops. Water-resistant pathways lead away from the electronics and out of the battery. It can withstand extreme temperatures down to -20 °C without compromising performance or battery life...

Manufacturer : Milwaukee Model: M18 CBLPP2B-502C Warranty: 3 years after registration on the website Description: Battery capacity (Ah) 5.0 Battery type: Li-ion Charging time: 80 minutes Number of batteries included: 2 Tool 1 M18 CBLDD - M18 TM Compact Brushless Driver Tool 2 M18 CBLID - M18 TM Compact Brushless 1⁄4 '' Voltage (V) 18M18 CBLDD - Compact Brushless Screwdriver: Compact brushless driver with a length of 165 mm for access in tight spaces. Advanced 13 mm heavy-duty metal chuck for quick bit changes and superior bit retention. 60 Nm torque-the best power-to-size ratio. REDLINKTM electronics for overload protection in the tool and battery ensure the best quality in the system. All-metal reversible belt clip to hang your tool quickly and easily. On-board fuel gauge and LED light. REDLITHIUMTM-ION battery pack delivers superior pack design, electronics, and fade-free performance to provide more run time and more work over the life of the pack. Flexible battery system: works with all MILWAUKEE® M18TM batteries. M18 CBLID - Compact Brushless 1/4'' Hex Impact Wrench: The compact driver measures just 130 mm in length, making it ideal for working in confined spaces. Brushless motor technology delivers 180 Nm of torque, 3,400 rpm, and 4,200 rpm. Heavy-duty metal gearbox and high-power gears for superior durability and maximum torque. On-board fuel gauge and LED light. All-metal reversible belt clip to hang your tool quickly and easily. REDLINKTM electronics for overload protection in the tool and battery ensure the best quality in the system. REDLITHIUMTM-ION battery pack delivers superior pack design, electronics, and fade-free performance to provide more runtime and more work over the life of the pack. Flexible battery system: works with all MILWAUKEE® M18TM batteries. M18TM 5.0 Ah Battery - M18 B5 : 2.5 times more runtime, up to 20% more power, and up to 2 times longer battery life compared to other lithium-ion technologies and/or previous MILWAUKEE® battery technology. REDLITHIUMTM-ION protection with REDLINKTM digital protection from previous models to safeguard your investment in cordless power tools against misuse. Individual cell monitoring allows for optimal charging and discharging for maximum life. A durable metal-frame battery construction with impact-resistant separators protects against failure due to excessive vibration or drops. Water-resistant pathways lead away from the electronics and out of the battery. It can withstand extreme temperatures down to -20°C without compromising runtime or battery life. M12TM - M18TM FAST CHARGER - M12-18C: Recharges all M18 TM, M14 TM, and M12 TM REDLITHIUM TM -ION batteries. Recharges sequentially-first, first charge-resulting in less time required to manage charge cycles. REDLITHIUMTM-ION 3.0 Ah / 4.0 Ah batteries recharge in 60 min / 80 min or less. REDLITHIUMTM-ION 1.5 Ah / 2.0 Ah batteries recharge in 30 min / 40 min or less...

Manufacturer : Milwaukee Model: M18 FPP2A2-502X Warranty: 3 years after registration on the website Description:The set includes: Tool 1 M18 FPD2 - M18 FUELTM Impact Driver Tool 2 M18 FID2 - M18 FUELTM 1⁄4'' M12-18 FC - Fast Charger Battery capacity (Ah) 5.0 Battery type Lithium-ion Charging time 59 min Number of batteries included 2 Voltage (V) 18 M18 FPD2 - Impact Driver: POWERSTATETM brushless motor for heavy-duty use under load. Higher energy efficiency under load-exceptional torque of 135 Nm. Extremely compact design with a length of 175 mm for access in tight spaces. Advanced heavy-duty chuck providing enhanced bit grip. The intelligent REDLINK PLUSTM system provides advanced digital overload protection for the tool and battery and uniquely enhances tool performance under load. The REDLITHIUMTM-ION battery pack features superior pack construction, electronics, and fade-free performance to deliver more runtime and more work over the life of the pack. Individual battery cell monitoring optimizes tool runtime and ensures pack longevity. The battery fuel gauge displays remaining charge. 40 percent brighter LED worklight-compared to the previous model. All-metal reversible belt clips for quick and easy tool attachment. Flexible battery system: works with all MILWAUKEE® M18TM batteries. M18 FID2 - 1/4" Hex Driver: Higher energy efficiency under load-check out the 226 Nm torque. Faster drive speed than the previous model-up to 3,600 rpm and 4,300 ipm. Extremely compact design-total length of just 117 mm for access to tight spaces. To switch between four different speed settings and adjust the torque to maximize performance: Mode 1 for precision work. Mode 2 helps prevent damage to fasteners and materials. Mode 3 offers the best performance for the most demanding applications. Mode 4 is the best balance between precision work and maximum performance, offering speed, impact, and torque. POWERSTATETM brushless motor for heavy-duty applications under load. The REDLINK PLUSTM intelligent system uses digital protection against tool and battery overloading and ensures consistent tool performance under load. REDLITHIUMTM-ION battery pack offers superior pack design, electronics, and motor efficiency to maximize runtime and get more work done over the life of the pack. 1⁄4'' hex chuck for quick and easy bit changes. Flexible battery system: works with all MILWAUKEE® M18TM batteries. M12TM - M18TM FAST CHARGER M12-18 FC: Charges all M18TM, M14TM, and M12TM REDLITHIUMTM-ION batteries. Charges sequentially-first, first charge-which results in less time needed to manage charging cycles. M12TM REDLITHIUMTM-ION 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah batteries recharge in 28 min / 45 min / 57 min / 90 min or less. M18TM REDLITHIUMTM-ION 2.0 Ah / 4.0 Ah / 5.0 Ah / 6.0 Ah / 9.0 Ah batteries recharge in 26 min / 47 min / 59 min / 68 min / 95 min or less. M18TM 5.0 Ah Battery - M18 B5: 2.5 times more runtime, up to 20% more power, and up to 2 times longer battery life compared to other lithium-ion technologies and/or previous MILWAUKEE® battery technology. REDLITHIUMTM-ION protection with REDLINKTM digital protection from previous models to ensure your cordless power tool investment is protected against abuse. Individual cell monitoring allows for optimal charging and discharging for maximum lifespan. A durable metal-frame battery construction with impact-resistant separators protects against failure due to excessive vibration or drops. Water-resistant pathways lead away from the electronics and out of the battery. It can withstand extreme temperatures down to -20 °C without compromising performance or battery life...

Manufacturer : Milwaukee Model: M18 FPP4A-503P Warranty: 3 years after registration on the website Description:The kit includes: M18 FPD - M18 FUELTM impact drill M18 CHX - M18 FUELTM SDS-plus hammer M18 CAG125XPDB - M18 FUEL 12.5mm angle grinder Milwaukee® TICK - Bluetooth® tracking module PACKOUTTM tool cart M12-18FC charger Battery capacity (Ah) 5.0 Battery type: Lithium-ion Number of batteries required: 3 Voltage (V): 18 Milwaukee M18FPD2 Cordless Impact Driver: No-load speed (speed 1): 0 - 550 rpm No-load speed (speed 2): 0 - 2000 rpm Max. drilling diameter in steel: 16 mm Max. drilling diameter in masonry: 16 mm Max. drilling diameter in wood: 89 mm Battery capacity: 5.0 Ah, Li-ion, 18 V Chuck: 13 mm BPM: 0 - 32,000 bpm Torque: 135 Nm Weight (incl. battery): 2.2 kg Milwaukee M18 FIWF12 Brushless Impact Wrench, 1/2": Battery capacity: 5.0 Ah, Li-ion, 18 V Torque: 40/120/300/120 Nm No-load speed: 700/2,000/2,500/2,000 rpm Milwaukee M18CAG125XPDB Cordless Angle Grinder: Cutting depth: 33 mm Cutting disc diameter: 125 mm No-load speed: 8,500 rpm Spindle: M14 Weight (incl. battery): 2.2 kg M18CHX Cordless Hammer Drill: Max. diameter in wood: 30 mm Max. diameter in steel: 13 mm Max. diameter in concrete: 26 mm Max. impact rate: 0-4,900 bpm No-load speed: 0-1,400 rpm Impact energy: 2.5 J Chuck diameter: 54 mm Optimized drilling capacity (concrete): 6 - 20 mm M12TM - M18TM FAST CHARGER M12-18 FC: Charges all M18 TM, M14 TM, and M12 TM REDLITHIUM TM -ION batteries. Charges sequentially-first, first charge-which results in less time required to manage charging cycles. M12TM REDLITHIUMTM-ION 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah batteries recharge in 28 min / 45 min / 57 min / 90 min or less. M18TM REDLITHIUMTM-ION 2.0 Ah / 4.0 Ah / 5.0 Ah / 6.0 Ah / 9.0 Ah batteries recharge in 26 min / 47 min / 59 min / 68 min / 95 min or less. M18TM 5.0 Ah Battery - M18 B5: 2.5 times more runtime, up to 20% more power, and up to 2 times longer battery life compared to other lithium-ion technologies and/or previous MILWAUKEE® battery technology. REDLITHIUMTM-ION protection with REDLINKTM digital protection from previous models to ensure your cordless power tool investment is protected against misuse. Individual cell monitoring allows for optimal charging and discharging for maximum life. A durable metal-frame battery construction with impact-resistant separators protects against failure due to excessive vibration or drops. Water-resistant pathways lead away from the electronics and out of the battery. Can withstand extreme temperatures down to -20 °C without compromising runtime or battery life. PACKOUT Case - PACKOUTTM TROLLEY BOX : Part of the PACKOUT TM modular storage system. Weight capacity 113 kg. Industrial telescoping handle. Large 228 mm all-terrain wheels. IP65-rated weatherproof lid to protect against rain and debris. Metal-reinforced corners. Metal-reinforced locking mechanism. Interior organizer tray. Mounting point for ONE-KEYTM TICKTM...

The MAKITA tool set is a practical and convenient solution for any DIY enthusiast, featuring the essential tools for any project. The high-efficiency brushless BLDC motors provide longer runtime without recharging the battery and require no maintenance. The set consists of 3 tools (18V) , a cordless LED flashlight, a 33-piece bit set, 3 rechargeable batteries (1.5 Ah and 5.0 Ah/Li-Ion), a charger, and a Makita XL bag for storing and carrying tools. 1. Makita DHP485Z Cordless Screwdriver, Brushless 18V, 50 NmVoltage: 18 V;Battery type: Li-ion;Motor type: brushless;LED light: Yes;Quick-release chuck: 1.5-13 mm;Hammer drill mode: Yes;Speed settings: 2;Maximum speed: 0-500/1,900 rpm;Blows per minute/low: 0-7,500 / 28,500 rpm;Max. torque: 50 Nm;Max. Drilling Capacity [Wood]: 38 mm;Max. drilling capacity [metal]: 13 mm;Max. drilling capacity [masonry]: 13 mm;Torque settings: 21 + D;Noise level: 82 dB;Reverse: Yes;Weight: 1.8 kg2. Makita DTD154Z Cordless Impact Driver, Brushless 18V, 175 NmVoltage: 18 V;Battery type: Li-ion;Motor type: brushless;LED light: Yes;Hammer drill mode: Yes;Quick-change chuck: 1.5 - 13 mm;Maximum speed: 0-3,600 rpm;Blows per minute: 0-3,800 bpm;Maximum torque: 175 Nm;Chuck size: 1/4";Screw size: M4-M8;Standard bolts: M5 - M16;High-strength bolts: M5 - M14;Sound power: 96 dB;Weight: 1.2 kg3. Makita DGA506Z Cordless Angle Grinder, Brushless 18V, 125 mmVoltage: 18 V;Battery type: Li-ion;Motor type: brushless;Disc diameter: 125 mm;Bore size: 22.23 mm;Maximum speed: 0-8,500 rpm;Soft start: Yes;Speed control: No;Overload protection: Yes;Restart protection: Yes;Sound power: 79 dB;Weight: 2 kg4. Makita DML808 Cordless Flashlight, 18V LED 200 lmVoltage: 14.4 / 18 V;Battery type: Li-ion;Light source: LED;Luminous flux/brightness: 200 lm;Run time on a single battery: 32 hours;Swivel head: 60° to 110° (12 positions);Dimensions (L x W x H): 297 x 79 x 119 mm;Weight: 1 kg5. Makita B-66896 bit set with magnetic holder, 33 piecesBit length: 25/50 mm;Material: Steel;Set includes: 16 x 25 mm bits (PH1-PH3, PZ1-PZ3, T15-T30); 6 x 50 mm bits (PH2, PZ2, T15-T30); 6 pcs. x 1/4" HSS twist drill bits (2.5-5 mm); 3 pcs. x Magnetic socket wrench (6/8/10 mm); 1 pc. x Magnetic bit holder; 1 pc. x Bit holder with screw guide;Comes in a convenient plastic case;Weight: 1.5 kg6. Makita BL1815 rechargeable battery, 18V, 1.5 AhVoltage: 18 V;Battery type: Li-ion;Battery capacity: 1.5 Ah;LED indicator: Yes;Weight: 0.500 kg7. Makita BL1850 Rechargeable Battery, 18V, 5.0 AhVoltage: 18 V;Battery type: Li-ion;Battery capacity: 5.0 Ah;LED indicator: Yes;Weight: 0.600 kg8. Makita DC18SDCharger, 7.2-18V, Li-ion, 220-240VVoltage: 220-240V ~ 50-60 Hz;Charging range: 7.2-18 V;Rated capacity: 1.5 - 3.0 Ah;Battery type: Li-Ion / Makstar Ni-MH;Li-Ion charging time: 30 min (1.0-1.3 Ah); 60 min (3.0 Ah);Charging time for Makstar Ni-MH: 40 min (1.8 Ah); 70 min (3.1 Ah);Dimensions (L x W x H): 179 x 147 x 91 mm;Weight: 0.660 kg9. Makita XL Tool Bag 360 x 250 x 260 mm The Makita XL shoulder bag is made of wear-resistant materials. External Velcro pockets for tools and accessories. It is equipped with a carrying handle and a removable shoulder strap for maximum flexibility and convenient transport of the necessary tools. The bag's walls are padded to protect the tools. Dimensions (LxWxH): 360 x 250 x 260 mm...

The MAKITA tool set is a practical and convenient solution for any DIY enthusiast, including the essential tools for all kinds of projects. The high-efficiency motors ensure longer runtime without having to recharge the battery. The set consists of 4 tools (18V) , a 31-piece bit set, 2 rechargeable batteries (3.0 Ah/Li-Ion), a charger, and a Makita XL bag for storing and carrying tools. 1. Makita DSS611Z cordless circular saw, 18V, 165 mmVoltage: 18 V;Battery type: Li-ion;Motor type: brush;Blade diameter: 165 mm;Bore size: 20 mm;Cutting depth (0°): 64 mm;Cutting depth (45°): 46 mm;Cutting depth (50°): 36 mm;Maximum speed: 0-3,700 rpm;Noise level: 78 dB;Weight: 3.2 kg2. Makita DDF482Z Cordless Drill/Driver, 18V, 62 NmVoltage: 18 V;Battery type: Li-ion;Motor type: brush;LED light: Yes;Quick-release chuck: 1.5-13 mm;Hammer drill mode: Yes;Maximum speed: 0-600/1900 rpm;Max. torque: 62 Nm;Max. Drilling capacity [wood]: 38 mm;Max. drilling capacity [metal]: 13 mm;Max. drilling capacity [masonry]: 13 mm;Noise level: 80 dB;Reverse: Yes;Weight: 1.8 kg3. Makita DTD152Z Cordless Impact Driver, 18V, 165 NmVoltage: 18 V;Battery type: Li-ion;Motor type: brush;LED light: YES;Hammer drill mode: YES;Quick-change chuck: 1.5-13 mm;Maximum speed: 0-2900 rpm;Blows per minute: 0-3,500 bpm;Maximum torque: 165 Nm;Chuck size: 1/4";Screw size: M4-M8;Standard bolts: M5 - M16;High-strength bolts: M5 - M12;Sound power: 93 dB;Weight: 1.3 kg4. Makita DGA452Z Cordless Angle Grinder, 18V, 115 mmVoltage: 18 V;Battery type: Li-ion;Motor type: brush;Disc diameter: 115 mm;Bore size: 22.23 mm;Maximum speed: 0-10,000 rpm;Soft start: No;Speed control: No;Overload protection: Yes;Restart protection: Yes;Grinding vibrations: 10.0 m/s2;Grinding vibration: 2.5 m/s2;Deflection vibration (K): 1.5 m/s2;Sound power: 76 dB;Weight: 2.3 kg5. Makita E-00016 bit set with magnetic holder, 31 piecesBit length: 25 mm;Material: steel;Set includes: PH0, PH1, PH2, PH3/ PZ0, PZ1, PZ2, PZ3 / T10, T15, T20, T25, T27, T30, T40 / HEX3, HEX4, HEX5, HEX6 / SL0.6x4.5, SL0.8x5.5, SL1.2x6.5 / 1 pc. - Magnetic holder (60 mm - 1/4");Comes in a plastic battery-shaped case;Weight: 0.200 kg6. Makita BL1830 rechargeable battery, 18V, 3.0 AhVoltage: 18 V;Battery type: Li-ion;Battery capacity: 3.0 Ah;LED indicator: Yes;Weight: 0.708 kg7. Makita DC18SDCharger, 7.2-18V, Li-ion, 220-240VVoltage: 220-240V ~ 50-60 Hz;Charging range: 7.2-18 V;Rated capacity: 1.5 - 3.0 Ah;Battery type: Li-Ion / Makstar Ni-MH;Li-Ion charging time: 30 min (1.0-1.3 Ah); 60 min (3.0 Ah);Charging time for Makstar Ni-MH: 40 min (1.8 Ah); 70 min (3.1 Ah);Dimensions (L x W x H): 179 x 147 x 91 mm;Weight: 0.660 kg8. Makita XL Tool Bag 360 x 250 x 260 mm The Makita XL shoulder bag is made of wear-resistant materials. External Velcro pockets for tools and accessories. It is equipped with a carrying handle and a removable shoulder strap for maximum flexibility and convenient transport of the necessary tools. The bag's walls are padded to protect the tools. Dimensions (L x W x H): 360 x 250 x 260 mm...

Makita BFR440RFE Cordless Screwdriver - quick-release magazine. Designed for efficient work on drywall surfaces. The automatic screw feed saves time by eliminating the need for manual insertion. The adjustable drive depth accommodates 3 different screw lengths. For screws sold in retail stores and hardware stores for fast construction. Compact size with a diagonal of just 15 mm. Manufacturer: Makita Chuck: 1/4" Model: BFR440RFE Weight: 1.70 kg Specifications: 3.5-4 mm x 25-41 mm Brand: Makita Battery voltage: 14.4 V Reverse: Yes Battery capacity: 3 Ah Machine type: Cordless screwdriver Battery type: Li-Ion No-load speed*: 4000 rpm Number of speeds: 1..

The Makita DDF083Z cordless two-speed brushless screwdriver is designed for drilling holes in wood and metal, and for driving self-tapping screws, screws, and other fasteners into various materials. The reverse function allows you to quickly change the spindle's rotation direction. A professional tool that is ideal for construction, installation, and repair work for both professionals and DIY enthusiasts. It is easy to use for a wide range of tasks thanks to its sufficiently high motor power. Sold without a battery or charger. Brand: Makita Model: DDF083Z Rechargeable battery - voltage: 18 V Torque: 40 Nm No-load speed: 0-1700 rpm Weight: 1.40 kg Packaging: boxed Number of speeds: 2-speed Brushless motor: yes Maximum in metal: 13 mm Maximum in wood: 36 mm Vibration level: 2.50 m/s2 Sound power level: 77 dB(A) Built-in work light: Yes Chuck: Hexagonal Shank size 1: 1/4" Warranty: 3 years after registration on the Makita website ..

The Makita DK0126G401 cordless tool set includes:1. MAKITA DF001G XGT 40V 140Nm Cordless Brushless ScrewdriverAdvantages:Maintenance-free brushless BLDC motor from the new XGT series of tools, batteries, and chargers with a 40V system;Two-speed speed control;The maximum drilling diameter is as follows: up to 20 mm in steel and up to 76 mm in wood;The tool is suitable for continuous operationTechnical specifications:Voltage: 40 V;Battery type: Li-Ion;Quick-release chuck: 1.5-13 mm;Speeds: 2;No-load speed, 1st speed: 0-650 rpm;No-load speed, 2nd speed: 0-2600 rpm;Maximum drilling diameter in steel: 20 mm;Maximum drilling diameter in wood: 76 mm;Maximum torque (hard): 140 Nm;Maximum torque (soft): 68 Nm; Torque settings: 20 + D; Built-in work light: yes; Brushless motor: yes;Noise level: 75 dB;Dimensions (L x W x H): 181 x 86 x 282 mm;Weight: 3 kg2. Makita GA005GZ 125mm Angle GrinderAdvantages:Features a powerful BLDC brushless motor that prevents the tool from overheating;The disc guard can be adjusted to any desired position without additional tools;Features a soft start and automatic speed control;The anti-restart function prevents the machine from turning on when the battery is inserted;The new safety button features a button on the inside of the head that allows you to rotate the guard to 7 different preset positions;AFT technology shuts off the motor if the cutting disc jams;Removable, washable side filters extend the tool's lifespan;The machine is protected against dust and moisture thanks to XPT technology;Technical specifications:Voltage: 40 VBattery type: Li-IonNo-load speed: 8500 rpmDisc diameter: 125 mmBore size: 22.23 mm Lighting: noNoise level: 81 dBDimensions (L x W x H): 410 x 140 x 168 mmWeight: 3.6 kg3. Makita TD001G Cordless Impact Driver Advantages:Brushless motor, XPT technology, allowing the tool to be used in high-humidity and dusty environments;Metal construction and an aluminum gearbox cover;Compact design with an ergonomic handle and LED lighting;Maximum torque of 220 Nm and a 1/4" hex drive;Technical specifications:Motor: brushlessBattery voltage: 40 VBattery type: Li-Ion, XGTChuck: 1/4" hexSpeed settings: 4Maximum torque: 220 NmNo-load speed: 0-1100/2100/3200/3700 rpmNo-load speed: 0-1100/2600/3600/4400 rpmDimensions: LxWxH: 120x86x250 mmWeight: 2 kg4. Makita JR001G Cordless Jigsaw Advantages: Compact and lightweight design with an anti-vibration housingIt is suitable for cutting solid wood and wood-based panels, metal profiles and pipes, plastic pipes and other plastic products, gypsum or cement-based cladding panels, aerated concrete or ceramic masonry blocks, roof tiles, fiberglass elements, etc. Electronic system for smooth start-up and maintaining constant speed even under heavy loadXPT technology protects the tool from dust and water splashesFeatures a dual LED light with pre- and post-illumination of the work areaFeatures a trigger lock, an electric brake, and an anti-restart functionTechnical specifications:Voltage: 40 V Battery type: Li-IonSpeed settings: 2No-load speed: 0 - 2300-3000 min-1Blade stroke: 32 mm Maximum cutting depth in wood: 255 mmCutting soft steel pipes at 90°: 130 mm Lighting: LED Noise level: 85 dB Dimensions (L x W x H): 472 x 88 x 239 mmWeight: 3.5 kg 5. BL4040 rechargeable batteries - 2 pcs 6. Makita DC40RA quick charger - 1 pc 7. Carrying case - 1 pc..