Consumables for tools - Page 42

Milwaukee 4932471764 Diamond Core Bit for CeramicDescription: The Milwaukee 4932471764 Diamond MAX diamond core bit has a long service life thanks to its exceptionally sturdy body, which resists bending under load. This model operates exceptionally cleanly and delivers precise results. It is suitable for cutting holes in extremely hard materials such as porcelain, ceramic tiles, cast iron, or fiberglass. The special diamond coating along the entire edge is specifically designed for professionals who need to drill holes in extremely hard materials where drilling with conventional tools is impossible. Drilling is dry because the drill bits do not require additional cooling. The drill bit has an M14 thread, and the working length is 35 mm. Technical specifications:Diameter: 16 mm;Working length: 35 mm;Overall length: 68 mm;Material: diamond powder;Application: for ceramics, porcelain tiles, porcelain, fiberglass;Usage: dry drilling with an M14 angle grinder;Quantity per package: 1 pc.Weight: 0.09 kg..

Milwaukee 4932498341 Diamond Core Bit for CeramicDescription: The Milwaukee 4932498341 diamond core bit is perfect for drilling in hard materials such as porcelain, ceramics, granite, marble, plaster, fiberglass, bricks, and blocks. It guarantees clean, precise holes without scratches, offering exceptional durability and a long service life thanks to high-quality diamond particles and a sturdy alloy construction. With minimal water requirements-a brief dip at the start and every 5 seconds-it is easy to use in various conditions. Offset slots for removing excess material increase efficiency, and the universal design allows for use with drills and angle grinders. Milwaukee guarantees reliability and superior performance even on the hardest materials. Technical specifications:Diameter: 5 mm;Shank: 1/4"Application: for wet drillingCutting material: diamond powderApplication: for ceramics, porcelain tiles, porcelain, fiberglass;Quantity per package: 1 pc...

Milwaukee 4932498355 Diamond Core Drill Bit for CeramicsDescription: The Milwaukee 4932498355 diamond core bit is designed for professional drilling in extremely hard materials such as porcelain, granite, ceramic tiles, cast iron, and fiberglass. Thanks to its high-quality diamond coating and sturdy alloy body, the core bit ensures an exceptionally long service life and extremely fast cutting even in the most demanding applications, while resisting bending under load. With an M14 thread, it mounts directly to an angle grinder, and with suitable adapters, it can also be used with a spot polisher or a straight grinder. It is designed for dry drilling and does not require additional cooling. It ensures clean and precise holes without scratching the periphery, and the multiple side holes allow for easy and quick removal of the drilled material, contributing to more efficient and uninterrupted work. Technical specifications:Diameter: 30 mm;Working length: 35 mm;Overall length: 68 mm;Material: diamond powder;Application: for ceramics, porcelain tiles, porcelain, fiberglass;Usage: dry drilling with an M14 angle grinder;Quantity per package: 1 pc.https://player.vimeo.com/video/495834999..

Milwaukee 49560515 Diamond Core Bit for CeramicDescription: The Milwaukee 49560515 diamond core bit is perfect for drilling in hard materials such as porcelain, ceramics, granite, marble, plaster, fiberglass, bricks, and blocks. It guarantees clean, precise holes without scratches, offering exceptional durability and a long service life thanks to high-quality diamond particles and a sturdy alloy construction. With minimal water requirements-a brief dip at the start and every 5 seconds-it is easy to use in various conditions. Offset slots for removing excess material increase efficiency, and the universal design allows for use with drills and angle grinders. Milwaukee guarantees reliability and superior performance even on the hardest materials. Technical specifications:Diameter: 20 mm;Shank: 1/4"Application: for wet drillingCutting material: diamond powderApplication: for ceramics, porcelain tiles, porcelain, fiberglass;Quantity per package: 1 pc...

Diamond-coated drill bits are specially designed for professionals who need to drill into extremely hard materials such as porcelain, stoneware, floor tiles, cast iron, or fiberglass, which are very difficult to drill with conventional drill bits. These circular saws deliver excellent performance and superior support for the hardest materials. Water consumption: Unlike conventional diamond drill bits, which require a continuous water supply, these circular saws require only a limited amount of water. At the start of cutting each hole or drilling, simply dip the saw or drill bit in water. After that, this should be repeated every 5 seconds. Clean holes: Clean drilling and precise hole cutting without peripheral material chipping. Durability: To ensure long-term use, high-quality diamond grit is used for fast cutting and perfect preservation of the blade with exceptional support. Durability: The sturdy aluminum housing does not bend and is durable. Easier removal of cut material: Recommended for use with safety guards to ensure greater material removal, suitable for tight cuts. Versatile use: Can be used with angle grinders using the appropriate adapter or with drills. How to use with angle grinders: 1. Screw the M14 threaded adapter onto the angle grinder and tighten the circular saw blade securely with a wrench. Then use the spindle lock on the angle grinder and place the adapter directly onto the spindle. Then tighten securely with a wrench. 2. If the tiles are not fixed to the wall or floor, make sure they are securely clamped in place. 3. Dip the cutting edge of the circular saw blade in water. 4. Turn on the angle grinder at full speed. To prevent the tile from slipping, slowly bring the grinder toward the tile at a 20-30° angle and with light pressure. When the circular saw begins to cut into the tile and form a groove, gradually lift the circular saw so that the blade is horizontal to the tile. 5. Dip the cutting edge of the circular saw into water every 5 seconds. 6. Apply light pressure and use circular motions to maximize tool life...

Diamond-coated drill bits are specially designed for professionals who need to drill into extremely hard materials such as porcelain, stoneware, floor tiles, cast iron, or fiberglass, which are very difficult to drill with conventional drill bits. These circular saws deliver excellent performance and superior support for the hardest materials. Water consumption: Unlike conventional diamond drill bits, which require a continuous water supply, these circular saws require only a limited amount of water. At the start of cutting each hole or drilling, simply dip the saw or drill bit in water. After that, this should be repeated every 5 seconds. Clean holes: Clean drilling and precise hole cutting without peripheral material chipping. Durability: To ensure long-term use, high-quality diamond tips are used for fast cutting and perfect preservation of the blade with exceptional support. Durability: The sturdy aluminum body does not bend and is durable. Easier removal of cut material: Recommended for use with safety guards to ensure greater material removal, suitable for tight cuts. Versatile use: Can be used with angle grinders using the appropriate adapter or with drills. How to use with angle grinders: 1. Screw the M14 threaded adapter onto the angle grinder and tighten the circular saw blade securely with a wrench. Then use the spindle lock on the angle grinder and place the adapter directly onto the spindle. Then tighten securely with a wrench. 2. If the tiles are not fixed to the wall or floor, make sure they are securely clamped in place. 3. Dip the cutting edge of the circular saw blade in water. 4. Turn on the angle grinder at full speed. To prevent the tile from slipping, slowly bring the grinder toward the tile at a 20-30° angle and with light pressure. When the circular saw begins to cut into the tile and form a groove, gradually raise the circular saw so that the blade is horizontal to the tile. 5. Dip the cutting edge of the circular saw into water every 5 seconds. 6. Apply light pressure and use circular motions to maximize tool life...

Diamond-coated core bits are specially designed for professionals who need to drill into extremely hard materials such as porcelain, stoneware, floor tiles, cast iron, or fiberglass, which are very difficult to drill with conventional core bits. These circular saws deliver excellent performance and superior support for the hardest materials. Water consumption: Unlike conventional diamond drill bits, which require a continuous water supply, these circular saws require only a limited amount of water. At the start of cutting each hole or drilling, simply dip the saw or drill bit in water. After that, this should be repeated every 5 seconds. Clean holes: Clean drilling and precise hole cutting without peripheral material chipping. Durability: To ensure long-term use, high-quality diamond grit is used for fast cutting and perfect preservation of the blade with exceptional support. Durability: The sturdy aluminum housing does not bend and is durable. Easier removal of cut material: Recommended for use with safety guards to ensure greater material removal, suitable for tight cuts. Versatile use: Can be used with angle grinders using the appropriate adapter or with drills. How to use with angle grinders: 1. Screw the M14 threaded adapter onto the angle grinder and tighten the circular saw blade securely with a wrench. Then use the spindle lock on the angle grinder and place the adapter directly onto the spindle. Then tighten securely with a wrench. 2. If the tiles are not fixed to the wall or floor, make sure they are securely clamped in place. 3. Dip the cutting edge of the circular saw blade in water. 4. Turn on the angle grinder at full speed. To prevent the tile from slipping, slowly bring the grinder toward the tile at a 20-30° angle and with light pressure. When the circular saw begins to cut into the tile and form a groove, gradually lift the saw so that the blade is horizontal to the tile. 5. Dip the cutting edge of the circular saw into water every 5 seconds. 6. Apply light pressure and use circular motions to maximize tool life...

Diamond-coated drill bits are specially designed for professionals who need to drill into extremely hard materials such as porcelain, stoneware, floor tiles, cast iron, or fiberglass, which are very difficult to drill with conventional drill bits. These circular saws deliver excellent performance and superior support for the hardest materials. Water consumption: Unlike conventional diamond drill bits, which require a continuous water supply, these circular saws require only a limited amount of water. At the start of cutting each hole or drilling, simply dip the saw or drill bit in water. After that, this should be repeated every 5 seconds. Clean holes: Clean drilling and precise hole cutting without peripheral material chipping. Durability: To ensure long-term use, high-quality diamond grit is used for fast cutting and perfect preservation of the blade with exceptional support. Durability: The sturdy aluminum housing does not bend and is durable. Easier removal of cut material: Recommended for use with safety guards to ensure greater material removal, suitable for tight cuts. Versatile use: Can be used with angle grinders using the appropriate adapter or with drills. How to use with angle grinders: 1. Screw the M14 threaded adapter onto the angle grinder and tighten the circular saw blade securely with a wrench. Then use the spindle lock on the angle grinder and place the adapter directly onto the spindle. Then tighten securely with a wrench. 2. If the tiles are not fixed to the wall or floor, make sure they are securely clamped in place. 3. Dip the cutting edge of the circular saw blade in water. 4. Turn on the angle grinder at full speed. To prevent the tile from slipping, slowly bring the grinder toward the tile at a 20-30° angle and with light pressure. When the circular saw begins to cut into the tile and form a groove, gradually raise the saw so that the blade is horizontal to the tile. 5. Dip the cutting edge of the circular saw into water every 5 seconds. 6. Apply light pressure and use circular motions to maximize tool life...

Milwaukee 4932478278 Diamond Core BitDescription: The Milwaukee 4932478278 diamond core bit for ceramics is specially designed for drilling materials such as porcelain, stone, marble, artificial stone, terracotta, and ceramics. With a diameter of 25 mm and a length of 68 mm , this drill bit features a special diamond coating along the entire edge, designed specifically for professionals working with extremely hard materials where standard tools cannot cope. This tool allows for dry drilling, as the core bits do not require additional cooling. It features an M14 thread and a working length of 35 mm , making it suitable for various tasks while ensuring comfort and efficiency when working with these types of materials. Technical specifications:Diameter: Ø 25 mmWorking length: 35 mmLength: 68 mmCore bit connection: metric threadType of material to be processed: porcelain tile, ceramicWeight: 0.1 kg..

Milwaukee 4932492148 Concrete Cutting DiscDescription: The Milwaukee 4932492148 diamond concrete cutting disc is designed for cutting various types of hard construction materials. With a segment height of up to 15 mm (350 mm) , this blade ensures a longer tool life. The precisely arranged diamonds guarantee the best cutting performance, while the laser-welded short tooth segments provide exceptionally aggressive cutting. These features make the blade ideal for working with all types of hard construction materials, such as concrete and others, ensuring efficiency and precision when carrying out construction projects. Technical specifications:Blade diameter: 125 mmThickness: 2.6 mmBore size: 22.23 mmType: XHUD125..

Milwaukee 4932464715 Diamond Tile Cutting DiscDescription: The Milwaukee 4932464715 diamond blade is designed for exceptionally fast and precise cutting of soft and hard tiles, fine porcelain tiles, as well as natural and artificial stone. The turbo segment, combined with the ultra-thin body, ensures high cutting speed, excellent control, and exceptionally clean cuts. The blade generates less dust during operation, which improves visibility and comfort while cutting, making it a reliable choice for professional finishing and installation work. Technical specifications:Diameter: 76 mmBore diameter: 10 mmThickness: 1 mmSegment height: 10 mmApplication: granite, marble, ceramic, porcelain, artificial stone..

Milwaukee Diamond Drill Bit 4932498342Milwaukee diamond drill bits are specially designed for drilling into extremely hard materials such as porcelain, ceramic tiles, cast iron, or fiberglass. These bits guarantee excellent performance and superior service life, even under the toughest conditions. The cooling holes require a limited water supply, unlike standard diamond drill bits, which require a continuous flow of water. Simply dip the core bit in water at the start of each hole to be cut and then every 5 seconds during cutting. Drill clean, precise holes without any peripheral scratches. A solid alloy body that does not bend or warp easily. Technical Specifications:Brand: Milwaukee;Diameter: 6 mm;Shank: 1/4" HEX;Material: diamond powder;Application: for ceramic, porcelain tile, porcelain, fiberglass;Usage: wet drilling with drills;Quantity per package: 1 pc.;Weight: 0.250 kg...

Milwaukee 4932498343 Diamond Tile Drill BitDescription: The Milwaukee 4932498343 diamond drill bit is designed for drilling holes in extremely hard materials such as porcelain, granite, clinker tiles, cast iron, and fiberglass. The diamond coating ensures fast cutting and a significantly longer service life even in the most demanding applications. The drill bit can be used with both a drill/screwdriver and an angle grinder via a suitable adapter, making it a versatile solution for professional use. A constant water flow is not required for cooling-simply submerge the drill bit in water before starting to drill and every 3 seconds or so during operation for optimal performance and extended life. It ensures clean and precise holes without damaging the edges of the material. The high-quality diamond coating and sturdy metal body ensure excellent durability and resistance to bending under load. The multiple holes in the body allow for easy removal of the cut core, contributing to faster and more efficient work. Technical specifications:Diameter: 8 mm;Chuck: 1/4" HEX;Material: diamond powder;Application: for ceramics, porcelain tiles, porcelain, fiberglass;Usage: wet drilling with drills;Quantity per package: 1 pc.;..