Consumables for tools - Page 127

Manufacturer: Milwaukee Model: 4932471822 Description: - Strong magnet for a secure grip; - Features an impact energy absorption zone. 1/4" hex drive Length 152 mm..

Milwaukee MX4 SDS+ Concrete Drill Bit 4932430726Features: The Milwaukee 16x160mm professional concrete drill bit, with a working length of 100mm, features a new, more durable design that delivers up to 20% more drilling per charge compared to older models. 4 blades at 90° for perfectly round holes and optimal anchor retention. Center-point tip for easy, precise spot drilling. Welded carbide tip at 5-10 mm for higher speed and extended life. A thin flute at the tip for maximum chip removal and a thick flute at the base for greater stability and reduced bit breakage. The drill bit features improved rebar guards, which protect it upon impact with rebar. It offers higher speed and lower friction. https://www.youtube.com/watch?v=2jaC6pnICAc..

Milwaukee MX4 SDS+ Concrete Drill Bit 4932352953Features: The Milwaukee 16x210mm professional concrete drill bit, with a working length of 150mm, features a new, more robust and durable design that delivers up to 20% more drilling per charge compared to older models. 4 cutting edges at 90° for perfectly round holes and optimal anchor retention. Center-point tip for easy, precise spot drilling. Welded carbide tip at 5-8 mm for higher speed and extended life. A thin flute at the tip for maximum debris removal and a thick flute at the base for greater stability and reduced bit breakage. The drill bit features improved guards, which protect it upon impact with rebar. It offers higher speed and less friction. https://www.youtube.com/watch?v=2jaC6pnICAc..

Milwaukee MX4 SDS+ Concrete Drill Bit 4932352819Features: The Milwaukee 16x260mm professional concrete drill bit, with a working length of 200mm, features a new, more robust and durable design that delivers up to 20% more drilling per charge compared to older models. 4 blades at 90° for perfectly round holes and optimal anchor retention. Center-point tip for easy, precise spot drilling. Welded carbide tip at 5-8 mm for higher speed and extended life. A thin flute at the tip for maximum debris removal and a thick flute at the base for greater stability and reduced bit breakage. The drill bit features improved guards, which protect it upon impact with rebar. It offers higher speed and less friction. https://www.youtube.com/watch?v=2jaC6pnICAc..

Galvanized Nails for the Milwaukee M18FN18GS NailerDescription:Milwaukee 18G nailer nails are galvanized nails coated with resin, ensuring a secure hold and high quality. They are 50 mm long and are suitable for the Milwaukee M18FN18GS nailer. They are available in packs of 4,000 and are 18G type. Technical specifications:Head size: 2 mmMaterial: Resin-coated. GalvanizedAngle: 0°Quantity per package: 4,000 pcs.Total length: 50 mmSuitable for: M18FN18GSWire gauge: 18..

Milwaukee 4932459137 StaplesDescription:Milwaukee 18G nail gun nails are made of stainless steel, ensuring a secure hold and high quality. They are 40 mm long and are compatible with the Milwaukee M18FN18GS nail gun. They are available in packs of 5,000 and are 18G type. Technical specifications:Dimensions: 1.05 x 1.25 mmMaterial: Stainless steelAngle: 0°Package quantity: 5,000 pcs.Total length: 40 mmSuitable for: M18FN18GSWire gauge: 18..

Milwaukee MX4 SDS+ Concrete Drill Bit 4932356502Features: The Milwaukee 18x250mm professional concrete drill bit, with a working length of 200mm, features a new, more robust and durable design that delivers up to 20% more drilling per charge compared to older models. 4 blades at 90° for perfectly round holes and optimal anchor retention. Centering tip for easy, precise spot drilling. Welded carbide tip at 5-8 mm for higher speed and extended life. A thin flute at the tip for maximum debris removal and a thick flute at the base for greater stability and reduced bit breakage. The drill bit features improved guards, which protect it upon impact with rebar. It offers higher speed and less friction. https://www.youtube.com/watch?v=2jaC6pnICAc..

Manufacturer : Milwaukee The American brand Milwaukee is committed to the high quality of its products, which also meet all European standards-its name is synonymous with durability, reliability, and the highest quality in professional tools. Diameter: 22 mm Drilling depth: 41 mm Hole Dozer is a new technology for maximum performance. Crown design-a variable tooth design with 4-6 teeth per inch and a positive tooth angle of 10°-provides the following advantages: Faster and more aggressive cutting. Improved heat dissipation during cutting ensures that the teeth stay sharper for longer. Deeper, curved flutes provide more efficient chip evacuation, preventing clogging and heat buildup. The specially shaped tooth angle is less likely to snag on thinner materials. The teeth are reduced/side-cut to minimize binding and friction. Less force is required-this is achieved through a combination of aggressive tooth geometry and good clearance of the drill bit, resulting in lower drilling force. Crown Material: Matrix II high-speed steel is used for the tooth area of the hole-making crown. Matrix II contains 8% cobalt, which allows the teeth to retain their original hardness even at high operating temperatures when used in metal-cutting applications. Bimetal construction The high-speed steel teeth are laser-welded onto a high-quality steel body. The teeth are then vacuum-hardened to 65 HRC at a temperature of 600 °C to achieve maximum durability and service life. Thanks to the high wear resistance of the Matrix II material, these crowns are ideal for cutting hard materials, such as stainless steel and acid-resistant steels, as well as softer materials like wood. Core thickness: 1.27 mm hardened steel to maintain its shape while also providing built-in flexibility. The effective cutting depth is 41 mm. Back plate design: The back plates are constructed from thick steel, ensuring that the holes will not enlarge over time. The thick backs add strength and rigidity, reducing vibrations. 4 holes for securing pins for easier mounting on the workbench. A perfectly crafted back plate, especially important for larger-diameter core bits. The diagonal slots help remove and eject the core. This high-quality core bit is the perfect solution for cutting all types of materials: - steel up to 1000 N/mm2 strength - stainless steel and acid-resistant steel - non-ferrous metals, cast iron, aluminum, wood, MDF, drywall, sandwich materials, PVC...

Manufacturer: Milwaukee The American brand Milwaukee prides itself on the high quality of its products, which also meet all European standards-its name is synonymous with durability, reliability, and the highest quality in professional tools. Diameter: 25 mm Drilling depth: 41 mm Hole Dozer is a new technology for maximum performance. The bit design-a variable tooth design with 4-6 teeth per inch and a positive tooth angle of 10°-offers the following advantages: - Faster and more aggressive cutting. - Improved heat dissipation during cutting ensures that the teeth remain sharper for longer. - Deeper, curved flutes provide more efficient chip evacuation, preventing clogging and heat buildup. - The specially shaped tooth angle is less likely to snag on thinner materials. - The teeth are reduced/side-set to minimize binding and friction. - Less force is required-this is achieved through a combination of aggressive tooth geometry and good clearance of the drill bit, resulting in lower drilling force. Crown Material: - Matrix II high-speed steel is used for the tooth area of the drill bit. Matrix II contains 8% cobalt, which allows the teeth to retain their original hardness even at high operating temperatures when used in metal-cutting applications. - Bimetal construction - The high-speed steel teeth are laser-welded onto a high-quality steel body. The teeth are then vacuum-hardened to 65 HRC at 600 °C to achieve maximum durability and service life. - Thanks to the high wear resistance of the Matrix II material, these crowns are ideal for cutting hard materials, such as stainless steel and acid-resistant steels, as well as softer materials like wood. Core Thickness: - 1.27 mm hardened steel to maintain its shape while also providing built-in flexibility. - The effective cutting depth is 41 mm. Back Plate Design: - The back plates are constructed from thick steel, ensuring the holes will not enlarge over time. - Thick backs add strength and rigidity, reducing vibrations. - 4 holes for securing pins for easier mounting on the workbench. - A perfectly crafted back plate, especially important for larger-diameter core bits. The diagonal slots help remove and eject the core. This high-quality core bit is the perfect solution for cutting all types of materials: - steel up to 1000 N/mm2 strength - stainless steel and acid-resistant steel - non-ferrous metals, cast iron, aluminum, wood, MDF, drywall, sandwich materials, PVC...

Milwaukee Extension 4932399242Description: The Milwaukee adapter/extension is made of high-quality, durable material and acts as a connection between the machine and the drilling tools. On the one hand, the system is fully compatible with all SDS-Max drilling tools, such as drill bits. Thanks to the Drill Connect system, you can reduce the total number of drilling tools, making it possible to change the diameter and length of the drilling tools in a single simple step. Users can take advantage of purchasing the more affordable short-length drill bits and extending the length with cost-effective extensions; plus, the flexibility of Drill Connect reduces the total number of drill bits one needs to carry in their toolbox.Technical Specifications:Brand: Milwaukee;Chuck: SDS-Max - SDS-Max;Length: 320 mm;Application: Hammer drills and drilling tools;Quantity per package: 1 pc...

Manufacturer: Milwaukee The American brand Milwaukee prides itself on the high quality of its products, which also meet all European standards-its name is synonymous with durability, reliability, and the highest quality in professional tools. Diameter: 35 mm Drilling depth: 41 mm Hole Dozer is a new technology designed to maximize performance for manufacturers. Crown design-a variable tooth design with 4-6 teeth per inch and a positive tooth angle of 10°-is intended to: - Faster and more aggressive cutting. - Improved heat dissipation during cutting, keeping the teeth sharper for longer. - Better chip evacuation, which prevents clogging and reduces difficulty. - The specially shaped tooth angle is less likely to catch on darker materials. - The teeth are reduced/offset to minimize chip formation and friction. - Less force is required-this is achieved through a combination of aggressive tooth geometry and effective chip clearance, resulting in low drilling force. Crown Material: - Matrix II high-speed steel is used for the tooth area of the crown. Matrix II contains 8% cobalt, which maintains the original hardness of the wood in its working parts, making it suitable for metal drilling. - Bimetal construction - The high-speed steel teeth are laser-welded onto a high-quality steel body. The teeth are then vacuum-hardened to 65 HRC at a temperature of 600 °C to achieve maximum durability and service life. - Thanks to the high wear resistance of Matrix II materials, these crowns are ideal for cutting hard materials such as stainless steel and acid-resistant steels, as well as softer materials like wood. Crown thickness: - 1.27 mm hardened steel to maintain its shape while also providing built-in flexibility. - Effective cutting length is 41 mm. Back plate design: - Back plates are constructed from thick steel, ensuring that the holes will not enlarge over time. - Thick back plates add strength and rigidity, reducing vibrations. - 4 holes for securing pins to facilitate plate mounting. - Perfectly crafted back plate, especially important for large-diameter core bits. Diagonal slots facilitate quick removal and ejection of the core. This high-quality core bit is the perfect solution for cutting all types of materials: - Steel with a tensile strength of up to 1000 N/mm2 - Stainless steel and acid-resistant steel - Non-ferrous metals, cast iron, aluminum, wood, MDF, drywall, sandwich materials, PVC...

Milwaukee step drill bits with JAM-FREE Performance feature a dual-flute design that ensures faster start-up, longer life, and charging ports on the cordless platform. Ideal for drilling small and large diameter holes in steel and plastic, these bits are optimized for high-speed cordless drills. The Rapid Strike tip enables a fast and precise start that generates less heat, resulting in a longer bit life. The black oxide coating also improves durability, hole quality, and bit life. • Smooth performance with a double-flute design ensures greater speed and control. • Rapid Speed optimized for high-speed cordless drills. • Rapid Strike Tip creates fast, precise starts and generates less heat. • Superior tool life with optimized geometry and black oxide coating for faster cutting and less heat. • Maximum battery charge cycles ensure greater user productivity. • Laser-engraved reference marks for easy stopping at any hole size. • 3-sided, secure-grip handles reduce bit slippage in the chuck. • Made in the USA...

Manufacturer: Milwaukee The American brand Milwaukee prides itself on the high quality of its products, which also meet all European standards-its name is synonymous with durability, reliability, and the highest quality in professional tools. Diameter: 40 mm Drilling depth: 41 mm Hole Dozer is a new technology designed to maximize performance for manufacturers. Crown design-a variable tooth design with 4-6 teeth per inch and a positive tooth angle of 10°-is intended to: - Faster and more aggressive cutting. - Improved heat dissipation during cutting, keeping the teeth sharper for longer. - Better chip evacuation, which prevents clogging and difficulty. - The specially shaped tooth angle is less likely to catch on darker materials. - The teeth are reduced/offset to minimize chip formation and friction. - Less force is required-this is achieved through a combination of aggressive tooth geometry and effective chip clearance, resulting in low drilling force. Crown Material: - Matrix II high-speed steel is used for the tooth area of the crown. Matrix II contains 8% cobalt, which is designed to maintain the original hardness of the wood in its working parts, making it suitable for metal drilling. - Bimetal construction. - High-speed steel teeth are laser-welded onto a high-quality steel body. The teeth are then vacuum-hardened to 65 HRC at 600 °C to achieve maximum durability and service life. - Thanks to the high wear resistance of Matrix II materials, these crowns are ideal for cutting hard materials, such as stainless steel and acid-resistant steels, as well as softer materials like wood. Crown Thickness: - 1.27 mm hardened steel to maintain its shape while also providing built-in flexibility. - Effective cutting length is 41 mm. Back plate design: - Back plates are constructed from thick steel, ensuring that the holes will not enlarge over time. - Thick back plates add strength and rigidity, reducing vibrations. - 4 holes for securing pins to facilitate plate mounting. - Perfectly crafted back plate, especially important for large-diameter core bits. Diagonal slots facilitate quick removal and ejection of the core. This high-quality core bit is the perfect solution for cutting all types of materials: - Steel with a tensile strength of up to 1000 N/mm2 - Stainless steel and acid-resistant steel - Non-ferrous metals, cast iron, aluminum, wood, MDF, drywall, sandwich materials, PVC...

Milwaukee® Precision saw blades are designed to maximize cutting efficiency and durability when cutting the most common building materials. Milwaukee saw blades are designed to fit Milwaukee and most standard saws. Optimized cutting angles ensure improved cutting accuracy. Micro-carbide dispersed metal provides twice the life of standard carbon steel blades. The precise cutting process removes chips for cleaner cuts. Made in the USA Package quantity: 5 pcs. Blade dimensions: 150 x 45 x 8 mm..

Milwaukee 48906031 Multi-Purpose Oscillating Tool Blade The Milwaukee 48906031 blade is a universal Multi-Material model, used as an attachment for oscillating multi-tools to cut all types of metals, as well as soft and hard wood, wood with nails, plastic, non-ferrous materials, copper, thin metal, and fiberglass. The segmented bimetal design of the blade, found in many Milwaukee cutting tools, ensures a long service life, while the oxide coating prevents rust and maintains performance. Durable laser engraving for quick blade identification. The universal STARLOCK blade mount makes MILWAUKEE blades compatible with the most popular oscillating multi-tools...

Lambswool Polishing Pad For a high-gloss finish Genuine Milwaukee accessories Milwaukee 135mm Lambswool Polishing Pad 4932430395 with Velcro..

Milwaukee 4932472248 Bimetal Drill BitsDescription: The Milwaukee 4932472248 drill bit set offers durability and precision thanks to the high-quality HSS alloy with 8% cobalt, ensuring a long service life and resistance when cutting materials such as steel, stainless steel, aluminum, wood, and plastic. The variable 3.5 TPI tooth pitch ensures fast and aggressive cuts with minimal heat generation, while the 1.27 mm thick steel body provides stability and minimal vibration. With an effective cutting depth of 41 mm and recesses for easy core removal, these core bits are suitable for both handheld and stationary tools. The perfect solution for a wide range of applications, including metal, wood, and plastic. Technical specifications:Diameter: ⌀ 20, 25, 32, 35, 40, 44, 51, 54, 68, 76 mm;Material: Bi-MetalCutting depth: 41 mmApplication: steel (up to 1000 N/mm2 tensile strength), stainless steel, non-ferrous metals, cast iron, aluminum, wood, MDF, drywall, sandwich materials, and plasticTeeth: 3.5 TPIQuantity per package: 12 pcs.The set contains:10 x Drill bits 20, 25, 32, 35, 40, 44, 51, 54, 68, 76 mm1 x Standard adapter 9.5 mm1 x Hex key 14-30 mm1 x FIXTEC adapter 11 mm1 x Hex key 32-210 mm1 x Hex key..

Manufacturer: Milwaukee The American brand Milwaukee prides itself on the high quality of its products, which also meet all European standards-its name is synonymous with durability, reliability, and the highest quality in professional tools. Diameter: 51 mm Drilling depth: 41 mm Hole Dozer is a new technology designed to maximize performance for manufacturers. Crown design-a variable tooth design with 4-6 teeth per inch and a positive tooth angle of 10°-is intended to: - Faster and more aggressive cutting. - Improved heat dissipation during cutting, keeping the teeth sharper for longer. - Better chip evacuation, which prevents clogging and difficulty. - The specially shaped tooth angle is less likely to catch on darker materials. - The teeth are reduced/offset to minimize chip formation and friction. - Less force is required-this is achieved through a combination of aggressive tooth geometry and effective chip clearance, resulting in low drilling force. Crown Material: - Matrix II high-speed steel is used for the tooth area of the crown. Matrix II contains 8% cobalt, which maintains the original hardness of the wood in its working parts, making it suitable for metal drilling. - Bimetal construction. - The high-speed steel teeth are laser-welded onto a high-quality steel body. The teeth are then vacuum-hardened to 65 HRC at a temperature of 600 °C to achieve maximum durability and service life. - Thanks to the high wear resistance of Matrix II materials, these crowns are ideal for cutting hard materials, such as stainless steel and acid-resistant steels, as well as softer materials like wood. Crown Thickness: - 1.27 mm hardened steel to maintain its shape while also providing built-in flexibility. - Effective cutting length is 41 mm. Back plate design: - Back plates are constructed from thick steel, ensuring that the holes will not enlarge over time. - Thick back plates add strength and rigidity, reducing vibrations. - 4 holes for securing pins to facilitate plate mounting. - Perfectly crafted back plate, especially important for large-diameter core bits. Diagonal slots facilitate quick removal and ejection of the core. This high-quality core bit is the perfect solution for cutting all types of materials: - Steel with a tensile strength of up to 1000 N/mm2 - Stainless steel and acid-resistant steel - Non-ferrous metals, cast iron, aluminum, wood, MDF, drywall, sandwich materials, PVC...

The Milwaukee 6-40.5 mm step drill bit is used for drilling black and non-ferrous sheet metal up to 4 mm thick, as well as profiles and tubes made of copper, brass, aluminum, and stainless steel. Universal-purpose drill bit-drilling, countersinking, and countersinking. The sizes are laser-marked. This special drill bit does not require pre-drilling. The drill bit's design reduces the risk of bit binding and ensures a high cutting speed...