Bosch Standard for Concrete Diamond Cutting Disc 180 x 22.23 x 10 mm 2608602199

Bosch Standard for Concrete Diamond Cutting Disc, 180 x 22.23 x 10 mm

2608602199 is a 180 mm diamond cutting disc from Bosch's Standard for Concrete line. The bore is 22.23 mm, the size used by large angle grinders, the segment stands 10 mm tall and the cut is 2.0 mm wide.

The three figures that decide the choice

The 180 mm diameter sets which machine the disc belongs on and how deep a cut it reaches. The 22.23 mm bore decides whether it goes onto the spindle at all - the standard size on grinders built for 180 and 230 mm wheels. The 2.0 mm cutting width is the thickness of the kerf itself.

Built for concrete

Bosch lists the article in its family of diamond cutting discs for concrete, made for large angle grinders with a 22.23 mm bore. Standard is the entry line of the Bosch diamond range - meant for regular site work rather than continuous daily cutting. A diamond rim cuts by abrasion rather than by a tooth, so the disc wants to be fed straight: twisting it in the kerf is what breaks segments off.

Segment height is the wear reserve

The diamond layer around the rim is 10 mm deep. That layer wears away as the disc works, and when it is gone the disc is finished - which makes segment height a fairer measure of working life than diameter. Cutting to full depth in one pass loads the segments harder than two or three shallower passes, where the rim gets a chance to cool.

Packaging and part number

The disc is supplied in a paper and cardboard pocket with a euro hole, one disc per pack. The front carries the diameter, the bore and the Standard for Concrete name; the number 2 608 602 199 is printed along the bottom edge, with EAN 3165140441278. Bosch flags this article in its catalogue as running in the old packaging.

Technical specifications

What is in the pack

• Bosch Standard for Concrete diamond cutting disc for concrete, 180 x 22.23 x 10 mm - 1 pc.

Questions and Answers