Bosch Expert cutting disc for Inox ф125 mm,1,0 mm, 1 pcs. / 2608600549 Rapido, AS60TBF

Diverse and specialized work requires adherence to basic safety precautions when using an angle grinder and the Expert for Inox cutting disc - Rapido, AS 60 T INOX BF, 125 mm, 1.0 mm. The tool is dangerous. When working with different materials, sparks, abrasive particles, metal fragments, and broken pieces of the disc may fly out, so work rules must be strictly followed.

Before installing the Expert for Inox - Rapido cutting disc, AS 60 T INOX BF, 125 mm, 1.0 mm, check that the angle grinder is equipped with the backing pad, clamping nut, and guard. When installing or replacing the disc, disconnect the angle grinder from the power supply.
Check that the disc is in good condition. Ensure there are no cracks, visible defects, or damage to the hole's surface. If any are found, discard it.
After installing the Expert for Inox - Rapido, AS 60 T INOX BF, 125 mm, 1.0 mm cutting disc, spin it by hand and visually check that it rotates properly and does not wobble. Check that the nut is tightened.
Then plug the angle grinder into the power outlet and run it "dry" without a load to check for excessive vibration and to ensure the disc is not unbalanced. If so, check again to make sure it is installed correctly.
When cutting with the Expert for Inox - Rapido cutting disc, AS 60 T INOX BF, 125 mm, 1.0 mm, always wear personal protective equipment and avoid cutting or grinding metals near flammable objects and substances.
When working with the disc, the workpiece must be securely and firmly clamped. Secure the workpiece using clamps, a vise, or place it on special supports. Never hold it in place with your feet or hands.
When cutting metal, make only straight cuts. Curved cuts are dangerous and can cause the Expert for Inox - Rapido cutting disc, AS 60 T INOX BF, 125 mm, 1.0 mm, to jam or break.

Technical Specifications:

Product Line: PRO Consumables
Specification: AS 60 T INOX BF, 125 mm, 1.0 mm
Product text, gray consumables: Straight
Rapido, fast and clean cuts without burrs or blue discoloration
Packaging type: Unpackaged product, without Euro hole
Commercial packaging unit: 1 pc.
Details
Specification: AS 60 T INOX BF
Diameter, mm: 125
Bore diameter, mm: 22.23
Thickness, mm: 1.0
Suitable for
workpiece materials (detail): Stainless steel/Inox